electro-music.com   Dedicated to experimental electro-acoustic
and electronic music
 
    Front Page  |  Articles  |  Radio
 |  Media  |  Forum  |  Wiki  |  Links  |  Store
Forum with support of Syndicator RSS
 FAQFAQ   CalendarCalendar   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   LinksLinks
 RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in  Chat RoomChat Room 
 Forum index » Instruments and Equipment » WREN
Latest version
Post new topic   Reply to topic
Page 1 of 2 [29 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
Goto page: 1, 2 Next
Author Message
Blue Hell
Site Admin


Joined: Apr 03, 2004
Posts: 20703
Location: The Netherlands, Enschede
Audio files: 156
G2 patch files: 318

PostPosted: Sun Feb 23, 2014 5:54 pm    Post subject:  Latest version
Subject description: 2014.10.19.0
Reply with quote  Mark this post and the followings unread

http://bluehell.electro-music.com/modules/forums.html

Changed in version 2014.10.19.0

  • SeqRandom, a random notes module. A scale can be set with a base note and a lowest note and a highest note. A step count can be set and on each trigger a next random note fitting the set xonditions will be played. When the last step is passed the sequence will repeat from the start. A pulse on the random input will select a new set of notes for the sequence. Sequences will not be saved with the patch.

  • Made the reverb module to scale with the sample rate, it should sound better at higher sample rates now.

  • Made new images for signal polarity selectors on LFO and Envelope modules.

  • Made a multi sample and hold module, one trigger input controls multiple sample and hold units in one module.

  • Added some extra in / out pairs for the multi multiplier module.

  • PluckOsc added, a Karplus-Strong model.

  • New mixer, T1to1, a one input chainable three channel mixer.

  • Logic divider forgot to clear the ResetFlag, so after one reset it would stay in reset mode - fixed that.

  • Fixed a bug in most of the sequencers .. had 'optimized' some code, they were not working at all anymore.

  • Added a new FX tab and moved some effect modules there. Also moved the wave player module to the OSC tab.

  • Added a zero crossing based frequency detector.

  • Added a resonating filter with decay instead of Q control.

  • Added a Bode frequency shifter module. The Bode shifter shifts all frequencies by an equal amount, meaning that harmonic relations between overtones willl be changed.

  • Added a running median filter. The median of a set of values is calculated as the middle value of that set after the set was ordered small to large (only odd sized sets are supported to a maximum size of 25). On each clock a new value is added to the set and the oldest value drops out, then the median is calculated and sent to the output.

  • Changed some initialization stuff, had to modify the HrastUnit a bit for that.





Changed in version 2014.9.23.0

  • A counter module, can count binary or sequentialy, up or down and it has a reset input too.

  • An ADConverter

  • A DAConverter

  • Fixed bug in pan module, the knob would go center to right only, not left to right.

  • Added a multmult module, where four inputs are multiplied by one common multiplier into four seperate outputs.

  • For BitCount = 1 I've changed the gate module back to it's old functionality. The boundary conditions were a bit odd with the new code.

  • Added level modulation to mixers MixM4to1 and MixS2to1.

  • Added position modulation level to Pan and XFade modules. The controls are fully open by default to be compatible with older patches.

  • Added control depth knob to formant filter. The control is fully opened by default to be compatible with older patches.

  • Made glyphs for output mode selector on some LFO and Envelope modules.

  • Made glyphs for wave shape selector on some OScillator and LFO modules.

  • Made a compressor, or actually it's an AGC more. It is feedback based in that it tries to maintain a set reference level at the output. In doing that it can both apply gain (for weak input signals, with a maximum of about 30 dB) or reduction (for strong input signals, also about 30 dB). Reaction speed can be set with an Attack control and fallback is controlled with a Release control. A pre-amp is included to be able to shift the set point easily.

  • Made a KleeBit module, which is 8 steps of a Klee sequencer. The bits can be chained to make a 16 or more steps Klee sequencer .. with some external glue.

  • Added a 3dB/octave (10db/decade) pink filter, to pinken up white noise.




Changed in version 2014.8.23.0

  • Instability issue in Flanger/Chorus module solved.

  • Output types for all LFOs: 'Normal', 'Inverted', 'Positive Only', 'Negative Only', 'Positive Only Inverted' and 'Negative Only Inverted'.

  • Activity light on NoiseLfo was not working.

  • Output types for AHD and ADSR envelopes: 'Normal', 'Inverted', 'Normal Negative' and 'Inverted Negative'.

  • Looks like the knob popups can be hanging at times ... made a breakout for it F8 will work.

  • Colored border on modules, user selectable.

  • Slow fall off on the display module (VU meter) .. instead of drop to zero immediately ... which sorta worked with the old lights update regime but not at all with the current one.

  • Finally found a nice compact form for an Euclidean rhythm generator (a variation on Bresenham's line drawing algorithm, read more about that here), and turned that into a new module. [On the sequencer tab, 1205]

  • Added a fast mode to the display module to have the meters react faster. This sometimes better fits the data to be displayed.

  • Added a CSV data module, it can read a Comma Separated Values file with up to 11 columns of data. The data is being clocked out with a trigger input, it can play forwards or backwards and there is a reset input. There is an option for playing the file data once or looped. When the mode is set to once the data sequence will start again after a reset signal on the reset input (or the global reset button being clicked on). Comments in the CSV file start with a # character, when a comment is on a non-data line it is ignored when the file is read, when it is at the end of a data line it will be displayed in the module for that step in the sequence. [On the sequencer tab, 1206]

  • Added digitizing to the logic modules, they used to convert the input into a single bit value (which is still an option) but they can now digitize to longer bit vectors as well. The logic function is then executed on the vectors instead of the single input value. Also changed the XOR and XNOR functions to perform odd and even parity respectively. Added two new functions ONE and NONE that behave like the old XOR and XNOR functions did, the output going active / inactive respectively when precisely one input is active. The bit vector stuff will not work on these two new functions.




Changed in version 2014.6.4.0

  • Okay .. it was SVF stability ... probably fixed now.

  • There was still debug info present in the release build, removed that, shrinking the exe size quite a bit.

  • Changed the way rendering works .. it does not generate live audio anymore. The thread's priority level is set to 'idle' so it wont hog a complete CPU. A limit can be set for the maximum recording duration, or it can be set to zero (or blank, or any string value that can not be translated into a float value) to make it record till the file reaches a size of 2GB. At any time the rendering can be stopped which will close the file. Likewise, leaving the program will close the file too .. or when an exception was raised .. the file may be shorter then than expected.




Changed in version 2014.6.3.0

  • Set all floating point exceptions to be masked for release version. Also clearing any exceptions after Tick executed (so errors wont propagate).

  • Added a property selector utility to set the value for the ControlType property on knobs more easily. This is a module design time feature only, it changes nothing for the synth itself ... although ... for some odd reason this halved the size of the executble tho o_O .. for the curious, it's in the knobs2013.pas unit.

  • There seem to be some numerical instability issues in one or more of the modules ... the program crashed on me last night. This may have to do with FPU exception masking and how windows deals with those, when the masking is set different from the windows masking even something simple like Abs( reasonable_value) my trigger a floating point exception.

  • Added sum output for scaler module, it gets the sum of the other four outputs.

  • Made 'inverted' output for envelop module, this one get the difference between the peak value of the normal output and the current value of the normal output. The idea being that with this output it is easy to make something get louder when something else gets softer. Using the peak value will prevent the inverted ouput from going negative, but it will take some time to settle. Also added a peak decay option on this with selectable time.

  • 2014-06-02 : Render to file option. Rolled my own RIFF writer for this .. may do a RIFF reader too now .. it seems not too hard ... anyway, did some tests and the WAV played in VLC, WMP and CoolEdit here, so guess they are fine ... no file length checks tho ... so be careful when it goes over 2 or 4 GB, the code could do 4 I think.




Changed in version 2014.5.29.0

  • Made popup menu's for selectors, so you can now right click on say an Lfo speed selector or a mute button to select a value directly instead of clicking to cycle through the values. Selectors currently are indicated by a yellow border.

  • Working to port over a FlangeChures and a PitchChanger I had laying around since the Turbo Pascal days .. or was that Borland Pascal ... old anyway .. from the days one could directly make interrupt code in Pascal. There seem to be some overflow issues to be sorted out. Some issues still with negative rates for the frequency shifter.

  • Removed profiling code for releases, this makes the program run a bit faster.

  • Fixed hint / popup window for knobs to keep displaying when the value is changed with the mouse.

  • After patch recompile dezippers are set to the final value immediately now to stop the slow glide-in that happened.




Changed in version 2014.5.24.0

  • Changed the module designer a bit, such that the module's PageName property will be automatic if the module happens to be on a TTabSheet with a non-empty Caption.

  • Changing some signals for AHD and ADSR modules to control rate to make them more efficient.

  • Changed the trigger lights on AHD and ADSR modules, they are on now when the envelope is in some active state, i.e. they now indicate envelope activity and no
    longer the presence of a trigger signal. This works better for very short trigger pulses taht would not be visible otherwise.

  • Removed the denormalized exceptions from the floating point exception mask to be able to find cases of denormalized numbers. As a result of that I've added Normalize() calls in a couple of places (Including the HrastUnit).

    This code will only be active in debug compiles of the program, to help find execution speed issues.

    All of this seems to have sped things up a bit.

  • Made update rate for lights user settable (settings page - press F3).



Changed in version 2014.6.3.0

  • Set all floating point exceptions to be masked for release version. Also clearing any exceptions after Tick executed (so errors wont propagate).

  • Added a property selector utility to set the value for the ControlType property on knobs more easily. This is a module design time feature only, it changes nothing for the synth itself ... although ... for some odd reason this halved the size of the executble tho o_O .. for the curious, it's in the knobs2013.pas unit.

  • There seem to be some numerical instability issues in one or more of the modules ... the program crashed on me last night. This may have to do with FPU exception masking and how windows deals with those, when the masking is set different from the windows masking even something simple like Abs( reasonable_value) my trigger a floating point exception.

  • Added sum output for scaler module, it gets the sum of the other four outputs.

  • Made 'inverted' output for envelop module, this one get the difference between the peak value of the normal output and the current value of the normal output. The idea being that with this output it is easy to make something get louder when something else gets softer. Using the peak value will prevent the inverted ouput from going negative, but it will take some time to settle. Also added a peak decay option on this with selectable time.

  • 2014-06-02 : Render to file option. Rolled my own RIFF writer for this .. may do a RIFF reader too now .. it seems not too hard ... anyway, did some tests and the WAV played in VLC, WMP and CoolEdit here, so guess they are fine ... no file length checks tho ... so be careful when it goes over 2 or 4 GB, the code could do 4 I think.




Changed in version 2014.5.17.0



Changed in version 2014.5.5.0

  • 2014-05-01 : HrastOsc vintage knob must not be in the knob map - fixed that.

  • User selectable sample rate: 44k1, 48k, 88k2 or 96k. Also changed the control rate from being 'sample rate' / 4 to 'sample rate' / 8.

  • Moved intdif module from control page to filter page and changed it's type ID from 312 to 1003. When an old patch will not load anymore please change the type ID for all intdif modules (type = 312) to 1003 - this can be done with any text editor (like notepad).

  • Removed lights handling from audio loop and made it timer driven instead.

  • Removed some synchronization code that did nothing.

  • Some more LFO range issues fixed, forgot range for SquareLfoTrig.

  • Added Lin range for LFOs, the FM will work linear then too. For trig LFOs this means that they may never finish their sequence.

  • 2014-04-30 : AHD envelope has clicks it should not have. Had A and D shapes reversed, looks like a click on the attack phase is more acceptable than one at the end of the D phase. This may need a bit more work later.

  • Added exception handlers for synth engine crashes. This will stop audio processsing and issues a message about that .. instead of the usual four ...


'

Changed in version 2014.4.30.0

  • Fixed square LFO speed range selection, I had a typo.

  • Made the quantizer working again, also it displays note fractions now instead of arbitrary numbers. To do that I moved the rationals source module from the project itself to the knobs2013 package.

  • Fixed LFO out lights, another typo.




Changed in version 2014.4.1.29

  • Major overhaul in how knobs are handled internally. The patch version has to be changed as a result, and current patches will not be compatible with this.

  • Made a popup menu for connectors - this sort of works .. break is not quite what I'd like yet - it should break the downstream connections, but currently also breaks the upstream one. Delete deletes the whole connection tree where the connector is on. Disconnect removes this one connector from the tree.

  • Made a module popup menu too, with cut copy and delete options.

  • Made a knob popup menu as well, added default values for knobs and the default can be set from the popup. Knobs can be locked and unlocked from the popup too. When an editable display is associated with a knob editing the value through the display will lock the kob to prevent the edited value to be changed by knob movements. The lock can be undone by unlocking the knob or by setting it to it's default value.

  • For 'File Save As ...' cut out the path in the save dialog to only show the file name there.

  • Changed the connector coloring a tad.

  • Had messed up oscillator frequency calculations, they were two octaves too low, fixed now.

  • 2014-03-03 : It happens on module insertions that the lights will not be updated (properly) anymore. It can also happen that a knob on a module controls something on another module. So it looks like the patch compiler has some issues. This seems fixed now.

  • 2014-03-28 : When an envelope of type AHD or ADSR is in fast mode and the patch is then saved the values will not always be properly set after reloading the patch. The same thing happens when such a module is copied and pasted. This seems fixed now.

  • 2014-04-01 : There is an issue with Knobs and setting values ... like an oscillator frequency by default is 440.00 Hz but after some messing with the mouse on that knob it is impossible to get that value set again. Only way to get it back is to drag the knob all the way to one of it's ends, then use the cursor up/down keys to try to get past that end, then use the cursor keys to step all th way back to the value ... yuck. This seems fixed now.

  • Defaults, stepcounts and ranges for several modules were changed.

  • Sequencer chaining would crash things on a floating point overflow, fixed.

  • Adding lookup tables, my earlier conclusion that they were faster only marginally was wrong. This will limit modulations to foreseen ranges though, and some value clipping will be needed. See previous point tho .. this would be needed anyway.

  • Cleaning up code, there are duplicates all over the place and bits of unused code too.

  • Adding speed ranges for LFOs, Slow, Medium, Fast and BPM.

  • Selectable waveforms for LFOs and oscillators to reduce the amount of modules a bit. Sine, Saw, Tri and Square.

  • Changed peak level indication for main in and output displays to slowly fall off, also added clip indication with a highlight color on those.

  • Reversed knob direction for Average filter. So now the cutoff frequency get higher when the knob is turned right, like how a filter works.

  • Removed the logic gates And .. XNor and replaced those by one Gate module with a selectable logic function. The same functions are available still.

  • Removed variable input count stuff, it had been disabled anyway.

  • Fixed bug in rectifier module, full wave mode did not work.

  • removed linear LFO and OSC stuff .. need to rethink that.

  • Repeats on the up / down knobs under knobs work just once and then never again. Ah .. forgot MouseDown := False in MouseUp handler, that fixed it.

  • Added HrastSVF 12 / 24 dB resonating filter.

  • Added cents control to HrastOsc

  • Frequency fine control for oscillators added, in cents. Range -50 to +50.

  • Added dB / Linear control selection to mixers, changed some attenuaters to dB mode here and there, added some level controls here and there. Renamed some stuff now that the patch versions are incompatible anyway.

  • De-zippering added for knobs on modules, inputs to be de-zippered can be added to a knobmap (at compile time) and the process will then be automatic.
    This will not work on mute buttons that use the SignalToLogic function to decide what to do, best to use SignalToMute( FInCache[ x]) * OutLevel or somthing alike instead of an if then else thingie.

  • Added exponential FM control for wave player. To use this the speed input must be connected to a signal source unequal to zero.
    Could have made the speed input to default to 1 to solve this , but then the position input would need the speed input to be set to zero ... compiled patches ideally would know if an input is connected to solve this issue.

  • Added color to random walk module

  • Added attenuators to square LFO and OSC modulation inputs.

  • Added time modulation for AHD and ADSR envelopes.

  • Fixed bug in AR and ARretrig envelopes that became visible after adding the dezipper code, it would try to dividde by zero.

  • Fixed bug in triggered LFO and OSC modules, they did not stop running always.

  • 2014-04-02 : Module paste can still mess up the module layout, and also can get modules at negative offsets still it seems.
    Looks like I finally nailed the the problem where the module lights stop working after a new module got inserted, or rather it would stop after a module was moved in the editor ... this was partly treated as a patch change and partly as a no change, resulting in the editor modules to be renamed and the patch not being recompiled - I've deleted the editor name changing line.

  • Repeats on the up / down knobs under knobs work just once and then never again. Ah .. forgot MouseDown := False in MouseUp handler, that fixed it.

  • 2014-04-01 : Unit interpretation in displays for knobs is not correct.
    I think this is not relevant anymore.

  • Fixed some graphics stuff that got broken over the months.




Changed in version 2014.4.1.0

  • Window state saved in ini file, when the window was maximized on exit it will be set maximized again when the program is started again. Minimized state is forgotten though.

  • Added a reset button which resets some module state on click, there are likely issues with this as reset is not as trivial as it may sound.

  • Added mutes per input on MixM4to1 and MixS2to1 modules.

  • Solved issues with output module, it does not need to be connected anymore and there an be as many as you like.

  • Solved issues with input module, it does not need to be connected anymore and there an be as many as you like.

  • Solved issues with knob default values of zero to not be used.

  • HrastProgrammer contributed a HrastOsc bandlimited oscillator module, thanks Hrast!
    I Changed the module layout a bit for this one to make it fit better into the scheme, and also added a little code to it to make sure that disconnected cables on control inputs will be reset to zero.

  • Fixed the situation where knob values zero could not be a default, changed some default settings for some modules.

  • Added the program icon to the source tree.

  • Fixed the project's DPR file, Delphi had put some crap in it.



For more history see the link above.

_________________
Jan

Last edited by Blue Hell on Sun Oct 19, 2014 10:46 am; edited 25 times in total
Back to top
View user's profile Send private message Visit poster's website
cebec



Joined: Apr 19, 2004
Posts: 1065
Location: Virginia
Audio files: 3
G2 patch files: 31

PostPosted: Tue Feb 25, 2014 6:22 am    Post subject: Reply with quote  Mark this post and the followings unread

Very nice, thanks!

Are there near-term plans for alternate knob control modes (via the mouse), e.g., vertical and horizontal in addition to circular?

_________________
http://www.soundcloud.com/cebec
Back to top
View user's profile Send private message
Blue Hell
Site Admin


Joined: Apr 03, 2004
Posts: 20703
Location: The Netherlands, Enschede
Audio files: 156
G2 patch files: 318

PostPosted: Tue Feb 25, 2014 12:47 pm    Post subject: Reply with quote  Mark this post and the followings unread

Ok, I will consider that, it never occurred to me people actually use that Shocked

In fact I just added the modes which was half an hour of work or so, but will have to mess a bit to make it usable ... which is not trivial it seems ... and will have to check if the mode is always set over all knobs .. with adding modules & such.

_________________
Jan
Back to top
View user's profile Send private message Visit poster's website
cebec



Joined: Apr 19, 2004
Posts: 1065
Location: Virginia
Audio files: 3
G2 patch files: 31

PostPosted: Tue Feb 25, 2014 12:49 pm    Post subject: Reply with quote  Mark this post and the followings unread

Understood! Laughing

Thanks.

_________________
http://www.soundcloud.com/cebec
Back to top
View user's profile Send private message
Blue Hell
Site Admin


Joined: Apr 03, 2004
Posts: 20703
Location: The Netherlands, Enschede
Audio files: 156
G2 patch files: 318

PostPosted: Tue Feb 25, 2014 4:37 pm    Post subject: Reply with quote  Mark this post and the followings unread

It was not trivial indeed ... update posted to http://bluehell.electro-music.com/modules/forums.html

Not quite what I'd want, but workable I think.

_________________
Jan
Back to top
View user's profile Send private message Visit poster's website
cebec



Joined: Apr 19, 2004
Posts: 1065
Location: Virginia
Audio files: 3
G2 patch files: 31

PostPosted: Tue Feb 25, 2014 7:08 pm    Post subject: Reply with quote  Mark this post and the followings unread

Works for me, thanks! Cool
_________________
http://www.soundcloud.com/cebec
Back to top
View user's profile Send private message
Blue Hell
Site Admin


Joined: Apr 03, 2004
Posts: 20703
Location: The Netherlands, Enschede
Audio files: 156
G2 patch files: 318

PostPosted: Sun Mar 09, 2014 3:19 pm    Post subject: Reply with quote  Mark this post and the followings unread

New version 2014.3.9.0

Added a couple of modules mainly and a search function.

The new modules are : Rectifier, MinMax, Integrator/Differentiator, MIDI note receiver, MIDI CC receiver, MIDI note transmitter, MIDI CC transmitter.


The MIDI modules work with MIDI over TCP, and this needs support by an external program. I made my netMIDI server available from my site, but the format used should be compatible with the MidiTangle program too.

http://bluehell.electro-music.com/modules/forums.html has some more info on this.

_________________
Jan
Back to top
View user's profile Send private message Visit poster's website
Blue Hell
Site Admin


Joined: Apr 03, 2004
Posts: 20703
Location: The Netherlands, Enschede
Audio files: 156
G2 patch files: 318

PostPosted: Fri Mar 14, 2014 12:19 pm    Post subject: Reply with quote  Mark this post and the followings unread

Shocked

Bugfix - see first post in this topic.

_________________
Jan
Back to top
View user's profile Send private message Visit poster's website
Blue Hell
Site Admin


Joined: Apr 03, 2004
Posts: 20703
Location: The Netherlands, Enschede
Audio files: 156
G2 patch files: 318

PostPosted: Fri Mar 28, 2014 3:17 pm    Post subject: Reply with quote  Mark this post and the followings unread

Added stereo to wave players and there is a new 6x6 matrix mixer, chainable, and it has a control input for each knob.

Edit: there was an unintended dependency on my Led unit, providing the MIDI LEDs, I removed that one and made a new source code release. This does not really affect the program itself, some round LEDs are square now.

_________________
Jan
Back to top
View user's profile Send private message Visit poster's website
Blue Hell
Site Admin


Joined: Apr 03, 2004
Posts: 20703
Location: The Netherlands, Enschede
Audio files: 156
G2 patch files: 318

PostPosted: Tue Apr 01, 2014 1:41 pm    Post subject: Reply with quote  Mark this post and the followings unread

New version 2014.4.1.0 - see first post for all details. Fresh source code was posted for this as well.

The main new feature is the HrastOsc made by HrastProgrammer, this is an anti-aliased multi waveform oscillator. Thanks for that Hrast Cool

_________________
Jan
Back to top
View user's profile Send private message Visit poster's website
BobTheDog



Joined: Feb 28, 2005
Posts: 3869
Location: England
Audio files: 32
G2 patch files: 15

PostPosted: Tue Apr 08, 2014 3:10 pm    Post subject: Reply with quote  Mark this post and the followings unread

Interesting stuff Jan.

Can XE5 build it for OSX?
Back to top
View user's profile Send private message
Blue Hell
Site Admin


Joined: Apr 03, 2004
Posts: 20703
Location: The Netherlands, Enschede
Audio files: 156
G2 patch files: 318

PostPosted: Tue Apr 08, 2014 4:59 pm    Post subject: Reply with quote  Mark this post and the followings unread

Yes it can .. but not this source code unfortunately .. it needs a different component set for that and then my code uses a lot of winapi stuff too.

Oh and I could not test it ... it wants 10.6 minimal, I have 10.5.8.

_________________
Jan
Back to top
View user's profile Send private message Visit poster's website
BobTheDog



Joined: Feb 28, 2005
Posts: 3869
Location: England
Audio files: 32
G2 patch files: 15

PostPosted: Tue Apr 08, 2014 11:08 pm    Post subject: Reply with quote  Mark this post and the followings unread

Ah, Ok.

I thought I was being optimistic Wink
Back to top
View user's profile Send private message
Blue Hell
Site Admin


Joined: Apr 03, 2004
Posts: 20703
Location: The Netherlands, Enschede
Audio files: 156
G2 patch files: 318

PostPosted: Tue Apr 29, 2014 1:47 pm    Post subject: Reply with quote  Mark this post and the followings unread

New version uploaded .. quite some changes ...

Key items would be ... Hrast Filter added and old patches are incompatible, sorry for that, but had to do that to make the knobs work better.

Some modules got removed, but most became variations of new more general modules.

Hope I didn't introduce too many new bugs Rolling Eyes

_________________
Jan
Back to top
View user's profile Send private message Visit poster's website
robsol
Stream Operator


Joined: Apr 24, 2009
Posts: 1777
Location: Bristol UK
Audio files: 264

PostPosted: Tue Apr 29, 2014 3:27 pm    Post subject: Reply with quote  Mark this post and the followings unread

Looks like quite an overhaul... And I like the new look. Smile

Now where did I put that spare time I set aside...

_________________
Muied Lumens Base Star
Back to top
View user's profile Send private message
HrastProgrammer



Joined: Oct 16, 2008
Posts: 228
Location: CPU
Audio files: 52

PostPosted: Wed Apr 30, 2014 5:02 am    Post subject: Reply with quote  Mark this post and the followings unread

Those new MP3 demos are really nice Very Happy
_________________
http://www.hrastprogrammer.com/hrastwerk/
http://hrastprogrammer.bandcamp.com/
Back to top
View user's profile Send private message Visit poster's website
Blue Hell
Site Admin


Joined: Apr 03, 2004
Posts: 20703
Location: The Netherlands, Enschede
Audio files: 156
G2 patch files: 318

PostPosted: Wed Apr 30, 2014 11:04 am    Post subject: Reply with quote  Mark this post and the followings unread

Thanks!
_________________
Jan
Back to top
View user's profile Send private message Visit poster's website
Blue Hell
Site Admin


Joined: Apr 03, 2004
Posts: 20703
Location: The Netherlands, Enschede
Audio files: 156
G2 patch files: 318

PostPosted: Wed Apr 30, 2014 2:32 pm    Post subject: Reply with quote  Mark this post and the followings unread

Some small bug fixes ...
_________________
Jan
Back to top
View user's profile Send private message Visit poster's website
Blue Hell
Site Admin


Joined: Apr 03, 2004
Posts: 20703
Location: The Netherlands, Enschede
Audio files: 156
G2 patch files: 318

PostPosted: Mon May 05, 2014 5:04 pm    Post subject: Reply with quote  Mark this post and the followings unread

And a couple more buggies killed in 2014.5.5.0 ... Bug squash

Also made the sample rate and buffer size configurable ... the synth needs to be stopped to change those, but even then it may crash later on,

Best to quit wren after a change there and then start it again.

It does sound better at higher sample rates and its less glitchy with larger buffer sizes, but the latter will add latency, and the first reduces the possible patch size.

_________________
Jan
Back to top
View user's profile Send private message Visit poster's website
Blue Hell
Site Admin


Joined: Apr 03, 2004
Posts: 20703
Location: The Netherlands, Enschede
Audio files: 156
G2 patch files: 318

PostPosted: Sat May 17, 2014 12:39 pm    Post subject: Reply with quote  Mark this post and the followings unread

New version ... added a couple of new modues and smoothed the envelopes a bit, less clicky now unless you want them to click.

Attached below is a demo featuring the formant and reverb modules, as well as the older HrastFilter.

Posted Image, might have been reduced in size. Click Image to view fullscreen.


2014-05-17--Blue Hell--Wren Demo 04.mp3
 Description:
A WREN demo track, formant filter, HrastFilter and reverb.

Download
 Filename:  2014-05-17--Blue Hell--Wren Demo 04.mp3
 Filesize:  5.52 MB
 Downloaded:  62 Time(s)


_________________
Jan
Back to top
View user's profile Send private message Visit poster's website
cebec



Joined: Apr 19, 2004
Posts: 1065
Location: Virginia
Audio files: 3
G2 patch files: 31

PostPosted: Mon May 19, 2014 5:29 am    Post subject: Reply with quote  Mark this post and the followings unread

Good stuff and love the demo!
_________________
http://www.soundcloud.com/cebec
Back to top
View user's profile Send private message
Blue Hell
Site Admin


Joined: Apr 03, 2004
Posts: 20703
Location: The Netherlands, Enschede
Audio files: 156
G2 patch files: 318

PostPosted: Sat May 24, 2014 1:43 pm    Post subject: Reply with quote  Mark this post and the followings unread

cebec wrote:
Good stuff and love the demo!


Oh, hey, somehow I didnt see this .. thanks!

_________________
Jan
Back to top
View user's profile Send private message Visit poster's website
Blue Hell
Site Admin


Joined: Apr 03, 2004
Posts: 20703
Location: The Netherlands, Enschede
Audio files: 156
G2 patch files: 318

PostPosted: Sat May 24, 2014 1:53 pm    Post subject: Reply with quote  Mark this post and the followings unread

Just made another new version, and another demo.

Posted Image, might have been reduced in size. Click Image to view fullscreen.


2014-05-17--Blue Hell--Wren Demo 05, Doctor Frederick von Meier.mp3
 Description:
Doctor Frederick von Meier - direct recording from a Wren patch

Download
 Filename:  2014-05-17--Blue Hell--Wren Demo 05, Doctor Frederick von Meier.mp3
 Filesize:  24.03 MB
 Downloaded:  53 Time(s)


_________________
Jan
Back to top
View user's profile Send private message Visit poster's website
Blue Hell
Site Admin


Joined: Apr 03, 2004
Posts: 20703
Location: The Netherlands, Enschede
Audio files: 156
G2 patch files: 318

PostPosted: Sat May 24, 2014 5:21 pm    Post subject: Reply with quote  Mark this post and the followings unread

http://electro-music.com/forum/post-400000.html#400000 has that previous patch used in a mix, way nicer :-)
_________________
Jan
Back to top
View user's profile Send private message Visit poster's website
Blue Hell
Site Admin


Joined: Apr 03, 2004
Posts: 20703
Location: The Netherlands, Enschede
Audio files: 156
G2 patch files: 318

PostPosted: Thu May 29, 2014 3:28 pm    Post subject: Reply with quote  Mark this post and the followings unread

Some minor changes, see first post in topic.
_________________
Jan
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic
Page 1 of 2 [29 Posts]
View unread posts
View new posts in the last week
Goto page: 1, 2 Next
Mark the topic unread :: View previous topic :: View next topic
 Forum index » Instruments and Equipment » WREN
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
e-m mkii

Please support our site. If you click through and buy from
our affiliate partners, we earn a small commission.


Forum with support of Syndicator RSS
Powered by phpBB © 2001, 2005 phpBB Group
Copyright © 2003 through 2009 by electro-music.com - Conditions Of Use