Author |
Message |
johans121
Joined: Jun 19, 2007 Posts: 178 Location: Huntsville, AL (USA)
|
Posted: Fri Oct 19, 2018 9:04 pm Post subject:
CGS Bridechamber Panel Documentation |
|
|
What's up? Long time no post. Anyway. I've finally gotten time (many years later) to finish some of my DIY backlog. But, since I've been gone Bridechamber has closed its doors and Ken Stone has retired
Anyway, I am looking for build documentation on two CGS Bridechamber projects - the CGS01 (Sub Oscillator) and the CGS VCO w/waveshapers. For those who are not familiar with the Bridechamber panels.... well they tended to add lots of options to the panels, these were not standard builds.
That said, I have looked for information on Archive.org and the only thing I can find is a low resolution image of a wiring diagram for the sub oscillator. Zooming into the image results in unreadable text.
I have attached screenshots of the two panels and the image I am referring to. Any information anyone can provide would be greatly appreciated.
Description: |
|
Filesize: |
2.44 MB |
Viewed: |
562 Time(s) |
This image has been reduced to fit the page. Click on it to enlarge. |
|
Description: |
|
Filesize: |
2.86 MB |
Viewed: |
578 Time(s) |
This image has been reduced to fit the page. Click on it to enlarge. |
|
Description: |
|
Filesize: |
1.43 MB |
Viewed: |
588 Time(s) |
This image has been reduced to fit the page. Click on it to enlarge. |
|
_________________ Don't feed me Indian, you WILL regret it!
-Jim |
|
Back to top
|
|
|
drapdap
Joined: Oct 11, 2004 Posts: 204 Location: London
Audio files: 1
G2 patch files: 1
|
|
Back to top
|
|
|
johans121
Joined: Jun 19, 2007 Posts: 178 Location: Huntsville, AL (USA)
|
Posted: Sun Oct 28, 2018 10:19 pm Post subject:
|
|
|
Thank you soooo much! I had that saved with my diy documentation a long time ago but I've changed computers several times since then. Some files are still with me and some are lost. _________________ Don't feed me Indian, you WILL regret it!
-Jim |
|
Back to top
|
|
|
johans121
Joined: Jun 19, 2007 Posts: 178 Location: Huntsville, AL (USA)
|
Posted: Fri Jan 22, 2021 12:03 pm Post subject:
|
|
|
I'm bringing this back to life 2 and half years later
The backlog is shrinking but these two monstrous projects are still lurking.
Does anyone have any additional information regarding the bridechamber CGS VCO w/Waveshapers and the suboscillator?
Thanks,
Jim _________________ Don't feed me Indian, you WILL regret it!
-Jim |
|
Back to top
|
|
|
|