Sequencers/mux/8 counter story

tiptaptempo

Hi Everyone,

Here is my first perf, some guys help me a lot to do that,
It's all about sequencers notes. I'm tweaking drums into g2.

There is 16 sequencers in the slot A, at the end of these i would like to go directly in the slot b, then c, and d. How can in do this ?

I read about the NoteSend or ControlSend module and
NoteRcv or Control Rcv . Maybe that "midi" solution optimize the slots and eat less ressource Razz

? Would be great ...

I think there is an easier way to do this, i need some suggestions of fellow patchers here.

Oh, and the G2, my first synth, is A COMPLETE F...... MACHINE, it's HUUUGE !!!!!!!!!!!

TURRICAN l1.2.prf2

Description:

Download

Filename:

TURRICAN l1.2.prf2

Filesize:

10.09 KB

Downloaded:

1890 Time(s)

Roland Kuit · Posted: Sun Sep 02, 2012 3:16 am Post subject:

No time now for your .perf.
But congrats you got your G2 working again Smile

blue hell

Roland Kuit · Posted: Sun Sep 02, 2012 11:25 pm Post subject:

Bluehell is right here. Go for the midi option. Midi note/control outs in your sequencer patch. Midi note/control receive in the listening slots. You can use as many as your dsp-load allows. For some example go here:
http://electro-music.com/forum/forum-79.html
These are controllers for other instruments, but instead those you can use your listening slots.

tiptaptempo

Hej,

Thank for replying ! You Dutch people are great.

Some guy patched me a perf. with use of audio busses.
The slot a is the bass drum
the b is the snare
the c the tom.

It was nearly perfect, but this patch detunes all the note sequencers.
Nearly perfect, because i had many ressources in all the slots to make my structures of the song and sound synthesis. And there is also the fx area.

My question is : Is there a way to use audio bus by not detunig notes ?

I need again a little help Embarassed

, when i will solve this structure problem, i would be on my own to make sound. There is many tutorials to do that.

jigsaw bus.prf2

Description:

Download

Filename:

jigsaw bus.prf2

Filesize:

10.6 KB

Downloaded:

3308 Time(s)

blue hell

tiptaptempo · Posted: Tue Sep 04, 2012 9:03 am Post subject:

Hi BLue Hell,
I solve the problem, i have rerouted all my signals, now the notes are not detuned.

BTW Do you know how can i chain two multiplexers ?

Roland Kuit · Posted: Wed Sep 05, 2012 1:13 am Post subject:

Do you want to add them or one after the other and why this last one? You can use a clocked step sequencer or if you want to scroll in those 16 steps, you can use a Control Sequencer.

tiptaptempo · Posted: Thu Sep 06, 2012 12:08 pm Post subject:

Hej Roland,

Yes, i would like to play one after the other.
And i'm already using a ctrl sequencer. but there is only 8 steps for now i'm using.

Now i'm at the end of my 8 multiplexer input and 8 "8counter" output.
I don't really know how to "chain" this.

For example, after the end of my first multiplexer, i would like an other goes directly and so on. For now i've only 8 sequencers and i need at least 24 or more to play a whole song.
Anyone knows how i can chain these damn sequencers ? Smile

Roland Kuit · Posted: Thu Sep 06, 2012 1:00 pm Post subject:

Something with switches or cross-faders Smile

varice · Posted: Thu Sep 06, 2012 11:26 pm Post subject:

tiptaptempo · Posted: Mon Sep 10, 2012 2:29 am Post subject: where is the trick

Roland Kuit · Posted: Mon Sep 10, 2012 9:42 am Post subject:

Not stop multiplexer 1 but switch to the second, otherwise the output value of the first is added to the 2nd. But for more steps you can easily chain the sequencer module.

tiptaptempo · Posted: Mon Sep 10, 2012 10:48 am Post subject: nearly reached