Search found 17 matches

Writing a big chunk of tracks to work out to and we have a tight deadline. The composer writing the songs already has a team of a couple programmers, but we need someone that excels at doing some real ...

would i do this by modding the adsr somehow?

Actually i might as well utilize both LFOs on the CGS utility LFO and maybe have a swtch to alternate between the onboard LFO or a patched in CV

Im thinking something along these lines...

Hi folks,

Im about to start building the neural agonizer and wanted to share some ideas i was pondering.

Im building the unit as a rackmount unit and want to build it as a standalone unit but al ...

Haxster,
Out of curiosity are you going to build the soundlab into a particular modular format? I went with frac rack because i didnt want to deal with giant 1/4 inch patch cables and bigger module s ...

I built the regular sound lab.

It looks like the sound lab plus uses 150k resistors on the cv inputs while the regular SL uses 470k (R16/R20)

The SL plus also has a 47k and 6.2k resistor betwee ...

Hello All!

I built a patched out soundlab and am now adding more modules to my setup.

I built the ADSR and seems to be working correctly. however when patched into the soundlab VCA i cant get th ...

is half wave retification bad? any idea of how much load it could handle? or how many mA wall wart i should use?

Thanks

Hello all!
I had a couple questions about the CGS66 PSU.

When i bought it i thought it i thought it was like the MFOS psu where you just use an AC wall wart adapter, but in the directions Ken talk ...

just so you guys know the Neural Agonizer is back in production on the tellun site. I emailled Scott a couple days ago but he hasnt gotten back to me. I dont know if theyre just slow or my email didnt ...

I tried a 1M pot on the depth which was pretty cool, a 500k pot would probably work better though.

YES, i figured it out. You mentioned measuring at X1 and i realized i wasnt patching the midi2cv into X1. I built the patched out soundlab (i guess i should have mentioned that) And on the patched out ...

Ok thats a puzzler.

What happens to the voltage at pin(s) 7 and the frequencies when you turn R55 and R58 from one end to the other? Confused

As the frequency goes up the volts go down, even into the ...

Well, here is the trimmer i used http://www.bourns.com/PDFs/3362.pdf

It looks like the mod is done correctly, the mod is built into the pcb but i follwed everything and it looks like it does in the ...

Thanks neandrewthal,
I checked the voltage on the paia and it is indeed .08 per note. So the problem is with the soundlab?

I have installed the 1/v per octave mod and tried adjusting the trimmers ...

Hello all,
I recently finished building a soundlab which is running great, and I just finished a paia midi2cv which seems to be working correctly (according to the self test mode) However an octave i ...

Author	Message
Topic: Dub-Step Programmer needed!
hopelessennui Replies: 0 Views: 5974	Posted: Mon May 14, 2012 5:51 pm Subject: Dub-Step Programmer needed! Subject description: Writing intense workout music and we need some cool synth programming. Forum: Wanted, For Sale, Opportunities and Requests » Opportunities Wanted and Available
hopelessennui Replies: 0 Views: 5974	Writing a big chunk of tracks to work out to and we have a tight deadline. The composer writing the songs already has a team of a couple programmers, but we need someone that excels at doing some real ...
Topic: Sound lab VCA + MFOS ADSR
hopelessennui Replies: 6 Views: 2992	Posted: Sun Jul 20, 2008 11:37 am Subject: Sound lab VCA + MFOS ADSR Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
hopelessennui Replies: 6 Views: 2992	would i do this by modding the adsr somehow?
Topic: Neural Agonizer Reverb Standalone with LFO
hopelessennui Replies: 4 Views: 6296	Posted: Wed Jul 16, 2008 1:19 pm Subject: Neural Agonizer Reverb Standalone with LFO Forum: DIY Hardware and Software » Developers' Corner
hopelessennui Replies: 4 Views: 6296	Actually i might as well utilize both LFOs on the CGS utility LFO and maybe have a swtch to alternate between the onboard LFO or a patched in CV
Topic: Neural Agonizer Reverb Standalone with LFO
hopelessennui Replies: 4 Views: 6296	Posted: Sat Jul 12, 2008 5:59 pm Subject: Neural Agonizer Reverb Standalone with LFO Forum: DIY Hardware and Software » Developers' Corner
hopelessennui Replies: 4 Views: 6296	Im thinking something along these lines...
Topic: Neural Agonizer Reverb Standalone with LFO
hopelessennui Replies: 4 Views: 6296	Posted: Sat Jul 12, 2008 2:33 pm Subject: Neural Agonizer Reverb Standalone with LFO Forum: DIY Hardware and Software » Developers' Corner
hopelessennui Replies: 4 Views: 6296	Hi folks, Im about to start building the neural agonizer and wanted to share some ideas i was pondering. Im building the unit as a rackmount unit and want to build it as a standalone unit but al ...
Topic: Sound lab VCA + MFOS ADSR
hopelessennui Replies: 6 Views: 2992	Posted: Fri Jul 11, 2008 12:56 am Subject: Sound lab VCA + MFOS ADSR Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
hopelessennui Replies: 6 Views: 2992	Haxster, Out of curiosity are you going to build the soundlab into a particular modular format? I went with frac rack because i didnt want to deal with giant 1/4 inch patch cables and bigger module s ...
Topic: Sound lab VCA + MFOS ADSR
hopelessennui Replies: 6 Views: 2992	Posted: Fri Jul 11, 2008 12:54 am Subject: Sound lab VCA + MFOS ADSR Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
hopelessennui Replies: 6 Views: 2992	I built the regular sound lab. It looks like the sound lab plus uses 150k resistors on the cv inputs while the regular SL uses 470k (R16/R20) The SL plus also has a 47k and 6.2k resistor betwee ...
Topic: Sound lab VCA + MFOS ADSR
hopelessennui Replies: 6 Views: 2992	Posted: Thu Jul 10, 2008 4:36 pm Subject: Sound lab VCA + MFOS ADSR Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
hopelessennui Replies: 6 Views: 2992	Hello All! I built a patched out soundlab and am now adding more modules to my setup. I built the ADSR and seems to be working correctly. however when patched into the soundlab VCA i cant get th ...
Topic: CGS Power Supply Questions
hopelessennui Replies: 17 Views: 16316	Posted: Sun Jun 29, 2008 2:32 pm Subject: CGS Power Supply Questions Forum: DIY Hardware and Software » Ken Stone designs - CGS
hopelessennui Replies: 17 Views: 16316	is half wave retification bad? any idea of how much load it could handle? or how many mA wall wart i should use? Thanks
Topic: CGS Power Supply Questions
hopelessennui Replies: 17 Views: 16316	Posted: Sun Jun 29, 2008 2:46 am Subject: CGS Power Supply Questions Forum: DIY Hardware and Software » Ken Stone designs - CGS
hopelessennui Replies: 17 Views: 16316	Hello all! I had a couple questions about the CGS66 PSU. When i bought it i thought it i thought it was like the MFOS psu where you just use an AC wall wart adapter, but in the directions Ken talk ...
Topic: WTB: Tellun Neural Agonizer PCB
hopelessennui Replies: 9 Views: 9712	Posted: Wed Jun 25, 2008 2:14 pm Subject: WTB: Tellun Neural Agonizer PCB Forum: Wanted, For Sale, Opportunities and Requests » Parts and Components
hopelessennui Replies: 9 Views: 9712	just so you guys know the Neural Agonizer is back in production on the tellun site. I emailled Scott a couple days ago but he hasnt gotten back to me. I dont know if theyre just slow or my email didnt ...
Topic: Psycho LFO mods
hopelessennui Replies: 5 Views: 14415	Posted: Tue Jun 24, 2008 3:47 pm Subject: Psycho LFO mods Forum: DIY Hardware and Software » Ken Stone designs - CGS
hopelessennui Replies: 5 Views: 14415	I tried a 1M pot on the depth which was pretty cool, a 500k pot would probably work better though.
Topic: Soundlab not in tune with paia midi2cv
hopelessennui Replies: 9 Views: 3970	Posted: Sun Apr 06, 2008 11:41 pm Subject: Soundlab not in tune with paia midi2cv Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
hopelessennui Replies: 9 Views: 3970	YES, i figured it out. You mentioned measuring at X1 and i realized i wasnt patching the midi2cv into X1. I built the patched out soundlab (i guess i should have mentioned that) And on the patched out ...
Topic: Soundlab not in tune with paia midi2cv
hopelessennui Replies: 9 Views: 3970	Posted: Sat Apr 05, 2008 12:10 pm Subject: Soundlab not in tune with paia midi2cv Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
hopelessennui Replies: 9 Views: 3970	Ok thats a puzzler. What happens to the voltage at pin(s) 7 and the frequencies when you turn R55 and R58 from one end to the other? As the frequency goes up the volts go down, even into the ...
Topic: Soundlab not in tune with paia midi2cv
hopelessennui Replies: 9 Views: 3970	Posted: Fri Apr 04, 2008 9:19 pm Subject: Soundlab not in tune with paia midi2cv Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
hopelessennui Replies: 9 Views: 3970	Well, here is the trimmer i used http://www.bourns.com/PDFs/3362.pdf It looks like the mod is done correctly, the mod is built into the pcb but i follwed everything and it looks like it does in the ...
Topic: Soundlab not in tune with paia midi2cv
hopelessennui Replies: 9 Views: 3970	Posted: Thu Apr 03, 2008 11:52 am Subject: Soundlab not in tune with paia midi2cv Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
hopelessennui Replies: 9 Views: 3970	Thanks neandrewthal, I checked the voltage on the paia and it is indeed .08 per note. So the problem is with the soundlab? I have installed the 1/v per octave mod and tried adjusting the trimmers ...
Topic: Soundlab not in tune with paia midi2cv
hopelessennui Replies: 9 Views: 3970	Posted: Wed Apr 02, 2008 11:38 pm Subject: Soundlab not in tune with paia midi2cv Subject description: 1 octave = 18 notes not 12 Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
hopelessennui Replies: 9 Views: 3970	Hello all, I recently finished building a soundlab which is running great, and I just finished a paia midi2cv which seems to be working correctly (according to the self test mode) However an octave i ...