Search found 514 matches

They do come off pretty easy. Just a squeeze and they will pop out.

One bit of advice: while you are in there, clean all of them, even though it is a daunting task. I opened mine to do the Store bu ...

Lately my G2X has been emitting an audible hum, and there is hum on the audio outs too. Not so loud that a guitarist would notice Laughing

but I do. I see others have run into this - any thoughts other ...

To cap this off correctly, if a bit late: it seems that the MPC sends an all notes off message and sustain off message immediately after each program change. By filtering these out... everything works ...

Yes, that is what it is. Basically it seems that any MIDI channel data that is received immediately after the program change, causes the crash. In fact, I am operating on a new hypothesis here. The pe ...

Ugh. Several crashes and reboots later, I still don't know what's going on.

First - this is caused by specific data strings sent from the MPC Live. The weird thing is that it only happens when movi ...

Whew! I am safe, but my heart is still pounding.

In a nutshell - junk data from my MPC crashed my G2x, HARD. As in it wouldn't boot. Fortunately I remembered how to install the OS and, after an in ...

My G2X just crashed, again, due to bad data sent from my MPC - long story - but this time, it is down for the count. Sys Chek Error, ready for update.

I have FUCKING WEDDING to play in a week, and ...

Well as far as I can tell, no calibration is necessary. The pot does go to zero. Easy fix, the pot is a standard Bournes part that needs desoldered but nothing tricky.

As per the subject. Mine is loose and it is the pot shaft itself that is wiggly, hence the pot must be replaced. Hover, since the pot does not (I think) necessarily go to full zero resistance, I am w ...

Thanks!

Does this enable the hidden modules?

Well, as you said, it's probably never going to happen, but that doesn't mean we can't share our ideas.

I agree with most of your suggestions but a couple are, I feel, counter-productive.. I won't ...

It might also be a corrupted patch maybe?

Good idea, but no.

I have also realized that it is only some performances that do this, I am going to start drilling down.

I am using an MPC Live that I have had for about a year with my G2s, and yesterday I tried an MPC feature for the first time. It worked for a while but then my G2X (1.62) started locking up

I am us ...

... he fixed the problem by vandalizing the equipment?

Had this old-timer never heard of a ground-lift plug?

I built the Metatronic Mods power supply, very nice. They sell only the PCB but the BOM is easy to fill (I did it with one order.)

https://www.metatronicmods.com/store/p9/PSU-linear-eurorack.html

Regarding polyphony, your numbers looks correct.

The loose plastic piece looks like a standoff, a plastic spacer that holds a circuit board in place. If should be repaired r replaced. Whether you w ...

The Molten Voltage pedal works! Very simple, not too expensive, nails it. Everything is hard-coded so I can't change my G2X global channel, but who cares? I wish I'd had this ten years ago. Thanks EW.

Thank you, those things look like exactly what I'm looking for. The one-trick Pony, custom program, would be perfect, and that guy is in my neck of the woods. The Arduino approach is appealing, but by ...

The Run/Stop button on the G2 is a real headache for me. because it's a soft button instead of dedicated, I have to switch to that page when starting the sequencer, and then switch to the other pages ...

This is an attempt at modeling Scottish Highland bagpipes, based on Chet Singer's reed model (http://electro-music.com/pm_tutorial/).

The tuning of bagpipes is an interesting subject. In a very sm ...

Thx guys, the 1.4 downgrade went smoothly and so far, no problems.

Thx Tim. I will probably be doing this later this week after I convince myself that I have good backups.

Interestingly, this performance contains a modified version of one of your granular loopers. ...

I am working on an update of a song I did a few years ago. Lately, I have had a disturbing problem: about 1 out of 4 or 5 times that I store this performance into the G2X, the instrument locks up and ...

I have been working with guitar sounds a lot lately, stuff based on the string oscillator - and have discovered that, occasionally, one or more voices will continue ringing at a low volume indefinitel ...

On of my G2s went tits up a few years ago when the RAM chip failed; any patches that utilized delays gave out nothing but noise. I don't know if that patch is affected by that, but it is a possibility ...

Author	Message
Topic: NMG2 unresponsive switch buttons
jamos Replies: 6 Views: 2220	Posted: Sat Apr 01, 2023 1:09 pm Subject: NMG2 unresponsive switch buttons Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 6 Views: 2220	They do come off pretty easy. Just a squeeze and they will pop out. One bit of advice: while you are in there, clean all of them, even though it is a daunting task. I opened mine to do the Store bu ...
Topic: G2X PSU hum
jamos Replies: 1 Views: 2182	Posted: Sat Nov 26, 2022 6:23 pm Subject: G2X PSU hum Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 1 Views: 2182	Lately my G2X has been emitting an audible hum, and there is hum on the audio outs too. Not so loud that a guitarist would notice but I do. I see others have run into this - any thoughts other ...
Topic: HEEELp! Ssys Chej Error - bricked G2X?
jamos Replies: 9 Views: 3191	Posted: Tue Aug 16, 2022 10:15 pm Subject: HEEELp! Ssys Chej Error - bricked G2X? Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 9 Views: 3191	To cap this off correctly, if a bit late: it seems that the MPC sends an all notes off message and sustain off message immediately after each program change. By filtering these out... everything works ...
Topic: HEEELp! Ssys Chej Error - bricked G2X?
jamos Replies: 9 Views: 3191	Posted: Sun Jul 03, 2022 3:07 pm Subject: HEEELp! Ssys Chej Error - bricked G2X? Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 9 Views: 3191	Yes, that is what it is. Basically it seems that any MIDI channel data that is received immediately after the program change, causes the crash. In fact, I am operating on a new hypothesis here. The pe ...
Topic: HEEELp! Ssys Chej Error - bricked G2X?
jamos Replies: 9 Views: 3191	Posted: Sun Jul 03, 2022 12:01 pm Subject: HEEELp! Ssys Chej Error - bricked G2X? Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 9 Views: 3191	Ugh. Several crashes and reboots later, I still don't know what's going on. First - this is caused by specific data strings sent from the MPC Live. The weird thing is that it only happens when movi ...
Topic: HEEELp! Ssys Chej Error - bricked G2X?
jamos Replies: 9 Views: 3191	Posted: Sat Jul 02, 2022 5:59 pm Subject: HEEELp! Ssys Chej Error - bricked G2X? Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 9 Views: 3191	Whew! I am safe, but my heart is still pounding. In a nutshell - junk data from my MPC crashed my G2x, HARD. As in it wouldn't boot. Fortunately I remembered how to install the OS and, after an in ...
Topic: HEEELp! Ssys Chej Error - bricked G2X?
jamos Replies: 9 Views: 3191	Posted: Sat Jul 02, 2022 5:24 pm Subject: HEEELp! Ssys Chej Error - bricked G2X? Subject description: God damn it Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 9 Views: 3191	My G2X just crashed, again, due to bad data sent from my MPC - long story - but this time, it is down for the count. Sys Chek Error, ready for update. I have FUCKING WEDDING to play in a week, and ...
Topic: Replacing the G2 mod wheel potentiometer
jamos Replies: 2 Views: 1696	Posted: Fri Feb 25, 2022 6:11 pm Subject: Replacing the G2 mod wheel potentiometer Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 2 Views: 1696	Well as far as I can tell, no calibration is necessary. The pot does go to zero. Easy fix, the pot is a standard Bournes part that needs desoldered but nothing tricky.
Topic: Replacing the G2 mod wheel potentiometer
jamos Replies: 2 Views: 1696	Posted: Mon Feb 21, 2022 3:20 pm Subject: Replacing the G2 mod wheel potentiometer Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 2 Views: 1696	As per the subject. Mine is loose and it is the pot shaft itself that is wiggly, hence the pot must be replaced. Hover, since the pot does not (I think) necessarily go to full zero resistance, I am w ...
Topic: OS editor (FMX) for 64bit Windows, MacOS and Linux available
jamos Replies: 2 Views: 2490	Posted: Tue Aug 24, 2021 2:41 pm Subject: OS editor (FMX) for 64bit Windows, MacOS and Linux available Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 2 Views: 2490	Thanks! Does this enable the hidden modules?
Topic: Nord Modular G3
jamos Replies: 1 Views: 2384	Posted: Sat Jun 26, 2021 11:07 am Subject: Nord Modular G3 Forum: Clavia Nord Modular » Wish List
jamos Replies: 1 Views: 2384	Well, as you said, it's probably never going to happen, but that doesn't mean we can't share our ideas. I agree with most of your suggestions but a couple are, I feel, counter-productive.. I won't ...
Topic: G2 locks up on repeated program changes?
jamos Replies: 2 Views: 2099	Posted: Sun Nov 29, 2020 12:21 pm Subject: G2 locks up on repeated program changes? Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 2 Views: 2099	It might also be a corrupted patch maybe? Good idea, but no. I have also realized that it is only some performances that do this, I am going to start drilling down.
Topic: G2 locks up on repeated program changes?
jamos Replies: 2 Views: 2099	Posted: Sun Nov 29, 2020 5:46 am Subject: G2 locks up on repeated program changes? Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 2 Views: 2099	I am using an MPC Live that I have had for about a year with my G2s, and yesterday I tried an MPC feature for the first time. It worked for a while but then my G2X (1.62) started locking up I am us ...
Topic: noises on G2X out with usb cable connected
jamos Replies: 114 Views: 159374	Posted: Wed Nov 18, 2020 10:53 am Subject: noises on G2X out with usb cable connected Forum: Clavia Nord Modular » Bugs
jamos Replies: 114 Views: 159374	... he fixed the problem by vandalizing the equipment? Had this old-timer never heard of a ground-lift plug?
Topic: Cheap 12v bipolar power supply suggestions
jamos Replies: 8 Views: 6488	Posted: Wed Oct 02, 2019 9:29 am Subject: Cheap 12v bipolar power supply suggestions Forum: DIY Hardware and Software » Developers' Corner
jamos Replies: 8 Views: 6488	I built the Metatronic Mods power supply, very nice. They sell only the PCB but the BOM is easy to fill (I did it with one order.) https://www.metatronicmods.com/store/p9/PSU-linear-eurorack.html
Topic: G2 expected polyphony?
jamos Replies: 2 Views: 3653	Posted: Sun May 26, 2019 10:49 am Subject: G2 expected polyphony? Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 2 Views: 3653	Regarding polyphony, your numbers looks correct. The loose plastic piece looks like a standoff, a plastic spacer that holds a circuit board in place. If should be repaired r replaced. Whether you w ...
Topic: dedicated Start/Stop Footswitch?
jamos Replies: 3 Views: 4475	Posted: Sun Mar 10, 2019 12:11 pm Subject: dedicated Start/Stop Footswitch? Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 3 Views: 4475	The Molten Voltage pedal works! Very simple, not too expensive, nails it. Everything is hard-coded so I can't change my G2X global channel, but who cares? I wish I'd had this ten years ago. Thanks EW.
Topic: dedicated Start/Stop Footswitch?
jamos Replies: 3 Views: 4475	Posted: Mon Feb 25, 2019 8:45 pm Subject: dedicated Start/Stop Footswitch? Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 3 Views: 4475	Thank you, those things look like exactly what I'm looking for. The one-trick Pony, custom program, would be perfect, and that guy is in my neck of the woods. The Arduino approach is appealing, but by ...
Topic: dedicated Start/Stop Footswitch?
jamos Replies: 3 Views: 4475	Posted: Sun Feb 24, 2019 4:25 pm Subject: dedicated Start/Stop Footswitch? Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 3 Views: 4475	The Run/Stop button on the G2 is a real headache for me. because it's a soft button instead of dedicated, I have to switch to that page when starting the sequencer, and then switch to the other pages ...
Topic: Bagpipies
jamos Replies: 2 Views: 7232	Posted: Fri Oct 19, 2018 11:07 pm Subject: Bagpipies Subject description: Scottish Highland bagpipes modeled, good basis for other bagpipes as well Forum: Clavia Nord Modular » G2 Patches - Experimental
jamos Replies: 2 Views: 7232	This is an attempt at modeling Scottish Highland bagpipes, based on Chet Singer's reed model (http://electro-music.com/pm_tutorial/). The tuning of bagpipes is an interesting subject. In a very sm ...
Topic: G2-X crashes when storing performance
jamos Replies: 4 Views: 5699	Posted: Wed Sep 12, 2018 3:15 pm Subject: G2-X crashes when storing performance Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 4 Views: 5699	Thx guys, the 1.4 downgrade went smoothly and so far, no problems.
Topic: G2-X crashes when storing performance
jamos Replies: 4 Views: 5699	Posted: Mon Sep 10, 2018 10:22 am Subject: Re: G2-X crashes when storing performance Subject description: Impending doom? Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 4 Views: 5699	Thx Tim. I will probably be doing this later this week after I convince myself that I have good backups. Interestingly, this performance contains a modified version of one of your granular loopers. ...
Topic: G2-X crashes when storing performance
jamos Replies: 4 Views: 5699	Posted: Mon Sep 10, 2018 9:44 am Subject: G2-X crashes when storing performance Subject description: Impending doom? Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 4 Views: 5699	I am working on an update of a song I did a few years ago. Lately, I have had a disturbing problem: about 1 out of 4 or 5 times that I store this performance into the G2X, the instrument locks up and ...
Topic: Infinite ringing on string oscillator?
jamos Replies: 2 Views: 4070	Posted: Sun Sep 02, 2018 6:25 pm Subject: Infinite ringing on string oscillator? Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 2 Views: 4070	I have been working with guitar sounds a lot lately, stuff based on the string oscillator - and have discovered that, occasionally, one or more voices will continue ringing at a low volume indefinitel ...
Topic: Tim Kleinert patch stopped working.. A hardware problem ??
jamos Replies: 6 Views: 5726	Posted: Mon Apr 02, 2018 10:27 am Subject: Tim Kleinert patch stopped working.. A hardware problem ?? Forum: Clavia Nord Modular » Nord Modular G2 Discussion
jamos Replies: 6 Views: 5726	On of my G2s went tits up a few years ago when the RAM chip failed; any patches that utilized delays gave out nothing but noise. I don't know if that patch is affected by that, but it is a possibility ...