Search found 137 matches

This looks like an AWESOME project! I actually have a non-functional Pro-One that I have slowly been working on, but it still has some issues to deal with - a bad j-wire keybed, one dead osc chip, a ...

I am very surprised by this. I've built 6 copies of this design so far with Fonik's pcb, using both revG and 1982 date code CEM3340's. I do all of my stuff with +/-15V, use PowerOne power supplies, ...

Since SynthCube doesn't seem to have the PCB's yet, I just ordered a few from Thonk! I'm going to build one or two with my NOS 3340's of 1980's vintage, and the others with revG chips. Should make a ...

Hi Aurelius, I have a couple 555-VCO panels you can have. My modular is 5U so I don't need them. Send me a PM and we will work out the details.

Phil

I'm a 5U guy, so I'll be making my own front panels and will only need main PCB's. I'm thinking 6 or 8 boards, maybe more. Can't wait to hear how the Maximus sounds next to my 555's!

Thanks!
Phi ...

.Outstanding! I've been waiting for this, I have a small cache of older pre-revG chips in my parts box that I have been wanting to use since Mr Henry announced the design. I'll definitely need a han ...

Thanks Bill, can't wait to get another set!

So my panel was patterned after the Sythesizers.com panel that Scot Solida did. Plus, some other guy (ahem) did an awesome gold one that also had influe ...

Hi Bill,

If you do another small run of through hole boards, I would definitely take 2! I've already built a pair with a 500mm and 1000mm soft-pot with 5U panels, and they are some of the best pro ...

A new CEM3340 VCO from TH? Too cool for words! I can't wait to see the design, and I will definitely build two for me and a few for a small modular that I am putting together for a good friend. I a ...

Hi J,

I found my old, beat up copy of common mode and sent you a low res scan the article. You can also find this, and a bunch of Thomas' other designs (VCO deluxe!) in a collection called " ...

Hi J,
Your subject says SSM2040 but you put SSM2014 in the post, I assume that's a type-o, Cool

My favorite SSM2040 filter, which I have had in my setup for a LONG time, is from Thomas Henry, publis ...

I just saw this, and it has knocked me for a loop. I am very saddened by the news of Rays passing, we have lost a true DIY champion.

I had been getting ready to start my mostly MFOS modular proj ...

oops, my bad! I misread the original message...

Hi Spuddo,
Have you looked at the two PIC based MIDI interfaces at:

http://www.acxsynth.com/midi2cv/midi2cvfr.htm

There is a lite version and one with more features. I am doing both already pr ...

Hi everyone! First post in a LONG time for me, but I am finally back to my DIY fun!

So I am working on a couple of SL Ultimate's with the expansion module. I am going to build the 1/V octave cont ...

Hey Tim! Are there any of these DVD's still available? I've been out of the snyth-DIY loop for a bit, and missed out on the initial release.

Many thanks!
Phil

How did I miss this one!!! If you are still taking orders, put me in for 1 + the UART!

Looks like another awesome project from fONIK and Dave!!!

Regards,
Phil

Hey Bill!

Thanks for the info on the softpot! I have started loading resistors on my boards (figured I'd do both at the same time), let the fun begin!

I will post pics of my finsihed appedages ...

Hey Everyone!

I am getting ready (finally) to build my appendage (hmmmm...)! I have the 500mm spoftpot that I bought originally when I got the PCB, but my buddy just GAVE me a 1000mm softpot th ...

Great video's Ryk! I am gonna need to have 4 or 5 of these boards when they are released. Sounds like an awesome little circuit!

Phil

Hey Delayed!

Great job on the silk screening! The rust brown color is very cool! Can you tell us some more details on how you did the screen printing? What kind of ink did you use? Did you have ...

Hey Slo!

AWESOME job on this! I have my IKC board about 80% loaded, and have been seriously vexed about how to package my keyboard up. you have given me some real inspiration! Your inclusion of ...

By the way Scott, I really dig your new web site layout! Keep up the great work! It's a resource I go back to over and over again. Very valuable!

Phil

Hey Photon,

That's a cool trick, bending the socket leads like that, I may use that!

Update, I got my THAT340's they other day. I've breadboarded page 1 of the schematic using the NPN pair in ...

Hi Scott,

Thanks for the reply, I will order myself a bunch of THAT 340's and start testing to see how it works with either the sine converter or the schmitt trigger in the same chip as the expo co ...

Author	Message
Topic: [Closed] New DIY kit for PRO2021 - A Pro-One Keyboard Synth
philpeery Replies: 4 Views: 4588	Posted: Fri Feb 08, 2019 10:59 pm Subject: [Closed] New DIY kit for PRO2021 - A Pro-One Keyboard Synth Forum: DIY Hardware and Software
philpeery Replies: 4 Views: 4588	This looks like an AWESOME project! I actually have a non-functional Pro-One that I have slowly been working on, but it still has some issues to deal with - a bad j-wire keybed, one dead osc chip, a ...
Topic: The VCO Maximus
philpeery Replies: 79 Views: 96450	Posted: Sun May 13, 2018 9:33 am Subject: The VCO Maximus Forum: DIY Hardware and Software » Thomas Henry designs
philpeery Replies: 79 Views: 96450	I am very surprised by this. I've built 6 copies of this design so far with Fonik's pcb, using both revG and 1982 date code CEM3340's. I do all of my stuff with +/-15V, use PowerOne power supplies, ...
Topic: Thomas Henry CEM3340 VCO
philpeery Replies: 23 Views: 37437	Posted: Wed Jan 03, 2018 8:49 am Subject: Thomas Henry CEM3340 VCO Forum: DIY Hardware and Software » Thomas Henry designs
philpeery Replies: 23 Views: 37437	Since SynthCube doesn't seem to have the PCB's yet, I just ordered a few from Thonk! I'm going to build one or two with my NOS 3340's of 1980's vintage, and the others with revG chips. Should make a ...
Topic: 3rd run for Thomas Henry's 555-VCO and Controller LFO
philpeery Replies: 87 Views: 129457	Posted: Tue Dec 05, 2017 10:20 am Subject: 3rd run for Thomas Henry's 555-VCO and Controller LFO Forum: DIY Hardware and Software » fonik's place
philpeery Replies: 87 Views: 129457	Hi Aurelius, I have a couple 555-VCO panels you can have. My modular is 5U so I don't need them. Send me a PM and we will work out the details. Phil
Topic: Thomas Henry VCO MAXIMUS
philpeery Replies: 9 Views: 14224	Posted: Thu Oct 12, 2017 9:21 am Subject: Thomas Henry VCO MAXIMUS Forum: DIY Hardware and Software » fonik's place
philpeery Replies: 9 Views: 14224	I'm a 5U guy, so I'll be making my own front panels and will only need main PCB's. I'm thinking 6 or 8 boards, maybe more. Can't wait to hear how the Maximus sounds next to my 555's! Thanks! Phi ...
Topic: Thomas Henry VCO MAXIMUS
philpeery Replies: 9 Views: 14224	Posted: Thu Oct 12, 2017 7:43 am Subject: Thomas Henry VCO MAXIMUS Forum: DIY Hardware and Software » fonik's place
philpeery Replies: 9 Views: 14224	.Outstanding! I've been waiting for this, I have a small cache of older pre-revG chips in my parts box that I have been wanting to use since Mr Henry announced the design. I'll definitely need a han ...
Topic: Appendage Ribbon Controller PC Board Orders for 2020
philpeery Replies: 56 Views: 169399	Posted: Wed Aug 02, 2017 11:21 am Subject: Appendage Ribbon Controller PC Board Orders for 2020 Forum: DIY Hardware and Software
philpeery Replies: 56 Views: 169399	Thanks Bill, can't wait to get another set! So my panel was patterned after the Sythesizers.com panel that Scot Solida did. Plus, some other guy (ahem) did an awesome gold one that also had influe ...
Topic: Appendage Ribbon Controller PC Board Orders for 2020
philpeery Replies: 56 Views: 169399	Posted: Tue Aug 01, 2017 9:09 pm Subject: Appendage Boards? YES please! Forum: DIY Hardware and Software
philpeery Replies: 56 Views: 169399	Hi Bill, If you do another small run of through hole boards, I would definitely take 2! I've already built a pair with a 500mm and 1000mm soft-pot with 5U panels, and they are some of the best pro ...
Topic: Thomas Henry CEM3340 VCO
philpeery Replies: 23 Views: 37437	Posted: Mon Feb 27, 2017 10:37 am Subject: Thomas Henry CEM3340 VCO Forum: DIY Hardware and Software » Thomas Henry designs
philpeery Replies: 23 Views: 37437	A new CEM3340 VCO from TH? Too cool for words! I can't wait to see the design, and I will definitely build two for me and a few for a small modular that I am putting together for a good friend. I a ...
Topic: SSM2040 - need a recommendations for filter design
philpeery Replies: 3 Views: 3540	Posted: Wed Dec 07, 2016 11:39 pm Subject: SSM2040 - need a recommendations for filter design Forum: DIY Hardware and Software
philpeery Replies: 3 Views: 3540	Hi J, I found my old, beat up copy of common mode and sent you a low res scan the article. You can also find this, and a bunch of Thomas' other designs (VCO deluxe!) in a collection called " ...
Topic: SSM2040 - need a recommendations for filter design
philpeery Replies: 3 Views: 3540	Posted: Fri Nov 25, 2016 10:38 am Subject: SSM2040 filter Forum: DIY Hardware and Software
philpeery Replies: 3 Views: 3540	Hi J, Your subject says SSM2040 but you put SSM2014 in the post, I assume that's a type-o, My favorite SSM2040 filter, which I have had in my setup for a LONG time, is from Thomas Henry, publis ...
Topic: R.I.P.
philpeery Replies: 16 Views: 13775	Posted: Thu Aug 04, 2016 12:37 pm Subject: R.I.P. Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
philpeery Replies: 16 Views: 13775	I just saw this, and it has knocked me for a loop. I am very saddened by the news of Rays passing, we have lost a true DIY champion. I had been getting ready to start my mostly MFOS modular proj ...
Topic: please mr Wilson
philpeery Replies: 3 Views: 3510	Posted: Fri Jun 20, 2014 10:40 pm Subject: please mr Wilson Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
philpeery Replies: 3 Views: 3510	oops, my bad! I misread the original message...
Topic: please mr Wilson
philpeery Replies: 3 Views: 3510	Posted: Fri Jun 20, 2014 5:24 pm Subject: please mr Wilson Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
philpeery Replies: 3 Views: 3510	Hi Spuddo, Have you looked at the two PIC based MIDI interfaces at: http://www.acxsynth.com/midi2cv/midi2cvfr.htm There is a lite version and one with more features. I am doing both already pr ...
Topic: MFOS 1/V oct keyboard controller keybed
philpeery Replies: 0 Views: 1885	Posted: Fri Jun 20, 2014 5:20 pm Subject: MFOS 1/V oct keyboard controller keybed Subject description: what are the keybed options? Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
philpeery Replies: 0 Views: 1885	Hi everyone! First post in a LONG time for me, but I am finally back to my DIY fun! So I am working on a couple of SL Ultimate's with the expansion module. I am going to build the 1/V octave cont ...
Topic: "Building a Synthesizer with Thomas Henry" DVDs available!
philpeery Replies: 24 Views: 26088	Posted: Sun Jul 01, 2012 2:47 pm Subject: "Building a Synthesizer with Thomas Henry" DVDs available! Forum: DIY Hardware and Software » Thomas Henry designs
philpeery Replies: 24 Views: 26088	Hey Tim! Are there any of these DVD's still available? I've been out of the snyth-DIY loop for a bit, and missed out on the initial release. Many thanks! Phil
Topic: PCBs for Dave Kendalls MIDI2Clock Motherboard
philpeery Replies: 121 Views: 176221	Posted: Sat Jul 30, 2011 12:10 pm Subject: PCBs for Dave Kendalls MIDI2Clock Motherboard Forum: DIY Hardware and Software » fonik's place
philpeery Replies: 121 Views: 176221	How did I miss this one!!! If you are still taking orders, put me in for 1 + the UART! Looks like another awesome project from fONIK and Dave!!! Regards, Phil
Topic: Building The Appendage. Share your Experiences
philpeery Replies: 146 Views: 374252	Posted: Sun Jul 10, 2011 1:28 pm Subject: Building The Appendage. Share your Experiences Forum: DIY Hardware and Software
philpeery Replies: 146 Views: 374252	Hey Bill! Thanks for the info on the softpot! I have started loading resistors on my boards (figured I'd do both at the same time), let the fun begin! I will post pics of my finsihed appedages ...
Topic: Building The Appendage. Share your Experiences
philpeery Replies: 146 Views: 374252	Posted: Thu Jul 07, 2011 6:02 pm Subject: the BIG spoftpot... Forum: DIY Hardware and Software
philpeery Replies: 146 Views: 374252	Hey Everyone! I am getting ready (finally) to build my appendage (hmmmm...)! I have the 500mm spoftpot that I bought originally when I got the PCB, but my buddy just GAVE me a 1000mm softpot th ...
Topic: The Liquid High Hat - Back from the dead! [PCB's]
philpeery Replies: 283 Views: 358611	Posted: Tue Feb 08, 2011 9:54 pm Subject: The Liquid High Hat - Back from the dead! [PCB's] Forum: DIY Hardware and Software
philpeery Replies: 283 Views: 358611	Great video's Ryk! I am gonna need to have 4 or 5 of these boards when they are released. Sounds like an awesome little circuit! Phil
Topic: 2010 Build Pictures
philpeery Replies: 575 Views: 617470	Posted: Thu Oct 21, 2010 5:56 pm Subject: 2010 Build Pictures Forum: DIY Hardware and Software
philpeery Replies: 575 Views: 617470	Hey Delayed! Great job on the silk screening! The rust brown color is very cool! Can you tell us some more details on how you did the screen printing? What kind of ink did you use? Did you have ...
Topic: Building The Appendage. Share your Experiences
philpeery Replies: 146 Views: 374252	Posted: Sat Sep 18, 2010 7:34 pm Subject: Building The Appendage. Share your Experiences Forum: DIY Hardware and Software
philpeery Replies: 146 Views: 374252	Hey Slo! AWESOME job on this! I have my IKC board about 80% loaded, and have been seriously vexed about how to package my keyboard up. you have given me some real inspiration! Your inclusion of ...
Topic: VCO-1 and matched transistors
philpeery Replies: 6 Views: 7166	Posted: Sat Jun 05, 2010 2:12 pm Subject: VCO-1 and matched transistors Forum: DIY Hardware and Software » Thomas Henry designs
philpeery Replies: 6 Views: 7166	By the way Scott, I really dig your new web site layout! Keep up the great work! It's a resource I go back to over and over again. Very valuable! Phil
Topic: VCO-1 and matched transistors
philpeery Replies: 6 Views: 7166	Posted: Sat Jun 05, 2010 2:10 pm Subject: VCO-1 and matched transistors Forum: DIY Hardware and Software » Thomas Henry designs
philpeery Replies: 6 Views: 7166	Hey Photon, That's a cool trick, bending the socket leads like that, I may use that! Update, I got my THAT340's they other day. I've breadboarded page 1 of the schematic using the NPN pair in ...
Topic: VCO-1 and matched transistors
philpeery Replies: 6 Views: 7166	Posted: Sat May 22, 2010 9:14 am Subject: VCO-1 and matched transistors Forum: DIY Hardware and Software » Thomas Henry designs
philpeery Replies: 6 Views: 7166	Hi Scott, Thanks for the reply, I will order myself a bunch of THAT 340's and start testing to see how it works with either the sine converter or the schmitt trigger in the same chip as the expo co ...