Search found 201 matches

Hi,

I've built another Haible SOST, this time with Random Source board 1.02, but am having a few issues, some might be related to board trace issues.

Has anyone successfully built one from Rando ...

I have placed the tracking trimmers on the front panel and am tuning them as needed.

There is a nice solution that I found a while back by Bourns that fit the longer trimmers and can hook to the fr ...

Version 9.2

$300

yaary (at) me (dot) com

did not had a chance to look at it due to tons of work...

will re-wire all links today evening and report back.

Thanks

Did some more testing:

1. The >95% is attributed to the inserted clock signal, which was a wide pulse from an LFO. I thought that the sync board would trim it down to a pulse and use it only to ...

Hi diablojoy

I am getting %98 PW on when the PW is at its lowest position and 100% on when i move the pot a little.
Have beads on the VC clocks boards.
Using 15v.
Have the board with DG413, but ...

I have finally gotten to re-connect my dual VC clock with the sync board today and have run into two issues:

1. Although components are identical, one clock runs much faster than the other one.
2. ...

Thanks diablojoy, I will probably need to check component values as well as resolder the board.

Will get to that this week and see how it will fair.

whomper try feeding in a signal if you can get any echo happening its not
a faulty mn3005

Feeding a signal in resulting in a delayed sound. The mix pot is at 6 O'clock and the delayed sound is ...

Coming back to the phaser and playing with it in a new track, I came to realize that its out volume is low compared to the signal volume coming in.

That is not necessary a problem, however raising ...

Here's a link to an audio file that has me sweep from the biggest delay setting down to the lowest one via the Delay pot and back again.

No input signal is present, Mix pot at its top most setting ...

Thanks Diablojoy,

Have switched between the two mn3005 I have in stock and both exhibit the same issue.

As the noise is composed of hiss and some high pitched tone that changes based on the dela ...

Hey, I have the same issue over here.

Where you able to fix the issue? I am experiencing the same issues with a relatively high noise level and RT3 makes no difference.

Hi,

I have ordered two PCBs of the Jaguar project from http://www.somaticcircuits.com/jaguar.htm.

Built the two and they are working great!

Interested in z set of boards. Haven't made up my mind wrt which option yet.

Thanks for the hints guys, they are really helpful.

I'll give it a shot this weekend.

Been having double finding 2M pot. Is there a modification I can make to make use of smaller values, like 1M, 500K and even 100K?

If another run happens, 2 for me please.

Switched the 074 with a 324 that I just bought today, and it works! The ADSR works as planned (just need to reverse some Pot wiring as they are reversed.

Thanks guys for your help!

Gary,

Thanks for the quick tips.

1. All pots are between 0v-15v.
2. Power rail has 6.2V, probably due to working with +-15V.
3. Traced trigger signal all the way to 4016. PINs 9&3 are stat ...

Hi,

I have just completed building a VC-ADSR and can not operationalize the module.

I am getting a constant 14V at the output no matter if there in an input gate signal or not. Verified componen ...

Are you guys interested in pcbs for the individual 808 voices?

Sure! Bring them on!

Yeah, I have built a double chorus versions with only the BBD boards.

They sound amazing! I love them so much that I usually have them as the last step of an analog bass or lead sounds. Analog sequ ...

Hello

hhmm, sounds a bit strange.

Does the Reset button stop the playing ?
It should only jump back to the first stage, not stop.

-ryk

Oh, you're right. Just checked it now and RESET do ...

Hello

Sorry for no reply guys, I have been away for some time
and now back, so can try and help.

Let me know if you are still having trouble with the START/STOP.

-ryk

Hi,

Yes, I am sti ...

Author	Message
Topic: Random Source SOST - Anyone?
whomper Replies: 0 Views: 1495	Posted: Thu Apr 06, 2023 7:24 am Subject: Random Source SOST - Anyone? Forum: DIY Hardware and Software » Jürgen Haible designs
whomper Replies: 0 Views: 1495	Hi, I've built another Haible SOST, this time with Random Source board 1.02, but am having a few issues, some might be related to board trace issues. Has anyone successfully built one from Rando ...
Topic: This just dawned on me Re: VCO calibration
whomper Replies: 18 Views: 4352	Posted: Sun Jan 27, 2013 2:52 am Subject: This just dawned on me Re: VCO calibration Forum: DIY Hardware and Software
whomper Replies: 18 Views: 4352	I have placed the tracking trimmers on the front panel and am tuning them as needed. There is a nice solution that I found a while back by Bourns that fit the longer trimmers and can hook to the fr ...
Topic: FS: Waves Native API collection
whomper Replies: 0 Views: 774	Posted: Mon Oct 01, 2012 7:51 am Subject: FS: Waves Native API collection Forum: Wanted, For Sale, Opportunities and Requests » Equipment/Software Wanted and For Sale
whomper Replies: 0 Views: 774	Version 9.2 $300 yaary (at) me (dot) com
Topic: Advanced Sync for the VC Master Clock
whomper Replies: 62 Views: 85252	Posted: Wed Dec 07, 2011 12:42 pm Subject: Advanced Sync for the VC Master Clock Forum: DIY Hardware and Software » fonik's place
whomper Replies: 62 Views: 85252	did not had a chance to look at it due to tons of work... will re-wire all links today evening and report back. Thanks
Topic: Advanced Sync for the VC Master Clock
whomper Replies: 62 Views: 85252	Posted: Mon Nov 21, 2011 1:15 pm Subject: Advanced Sync for the VC Master Clock Forum: DIY Hardware and Software » fonik's place
whomper Replies: 62 Views: 85252	Did some more testing: 1. The >95% is attributed to the inserted clock signal, which was a wide pulse from an LFO. I thought that the sync board would trim it down to a pulse and use it only to ...
Topic: Advanced Sync for the VC Master Clock
whomper Replies: 62 Views: 85252	Posted: Sat Nov 19, 2011 1:50 am Subject: Advanced Sync for the VC Master Clock Forum: DIY Hardware and Software » fonik's place
whomper Replies: 62 Views: 85252	Hi diablojoy I am getting %98 PW on when the PW is at its lowest position and 100% on when i move the pot a little. Have beads on the VC clocks boards. Using 15v. Have the board with DG413, but ...
Topic: Advanced Sync for the VC Master Clock
whomper Replies: 62 Views: 85252	Posted: Fri Nov 18, 2011 4:06 am Subject: Advanced Sync for the VC Master Clock Forum: DIY Hardware and Software » fonik's place
whomper Replies: 62 Views: 85252	I have finally gotten to re-connect my dual VC clock with the sync board today and have run into two issues: 1. Although components are identical, one clock runs much faster than the other one. 2. ...
Topic: problem with blacet time machine build
whomper Replies: 20 Views: 15085	Posted: Sat Oct 29, 2011 1:48 am Subject: problem with blacet time machine build Forum: DIY Hardware and Software
whomper Replies: 20 Views: 15085	Thanks diablojoy, I will probably need to check component values as well as resolder the board. Will get to that this week and see how it will fair.
Topic: problem with blacet time machine build
whomper Replies: 20 Views: 15085	Posted: Sat Oct 29, 2011 12:33 am Subject: problem with blacet time machine build Forum: DIY Hardware and Software
whomper Replies: 20 Views: 15085	whomper try feeding in a signal if you can get any echo happening its not a faulty mn3005 Feeding a signal in resulting in a delayed sound. The mix pot is at 6 O'clock and the delayed sound is ...
Topic: Schulte Compact A Phasing
whomper Replies: 659 Views: 654955	Posted: Wed Oct 19, 2011 2:17 pm Subject: Schulte Compact A Phasing Forum: DIY Hardware and Software » Jürgen Haible designs
whomper Replies: 659 Views: 654955	Coming back to the phaser and playing with it in a new track, I came to realize that its out volume is low compared to the signal volume coming in. That is not necessary a problem, however raising ...
Topic: problem with blacet time machine build
whomper Replies: 20 Views: 15085	Posted: Sun Oct 16, 2011 12:47 am Subject: problem with blacet time machine build Forum: DIY Hardware and Software
whomper Replies: 20 Views: 15085	Here's a link to an audio file that has me sweep from the biggest delay setting down to the lowest one via the Delay pot and back again. No input signal is present, Mix pot at its top most setting ...
Topic: problem with blacet time machine build
whomper Replies: 20 Views: 15085	Posted: Sat Oct 15, 2011 12:50 am Subject: problem with blacet time machine build Forum: DIY Hardware and Software
whomper Replies: 20 Views: 15085	Thanks Diablojoy, Have switched between the two mn3005 I have in stock and both exhibit the same issue. As the noise is composed of hiss and some high pitched tone that changes based on the dela ...
Topic: problem with blacet time machine build
whomper Replies: 20 Views: 15085	Posted: Fri Oct 14, 2011 1:42 pm Subject: problem with blacet time machine build Forum: DIY Hardware and Software
whomper Replies: 20 Views: 15085	Hey, I have the same issue over here. Where you able to fix the issue? I am experiencing the same issues with a relatively high noise level and RT3 makes no difference.
Topic: Spare SSM2044 VCF PCBs For Sale?
whomper Replies: 4 Views: 7010	Posted: Fri Sep 23, 2011 11:46 pm Subject: Spare SSM2044 VCF PCBs For Sale? Forum: DIY Hardware and Software » fonik's place
whomper Replies: 4 Views: 7010	Hi, I have ordered two PCBs of the Jaguar project from http://www.somaticcircuits.com/jaguar.htm. Built the two and they are working great!
Topic: Correction: I'm not making TR-808 Voice Boards...
whomper Replies: 246 Views: 270580	Posted: Thu Sep 22, 2011 11:25 am Subject: *Correction: I'm not* making TR-808 Voice Boards...** Forum: DIY Hardware and Software
whomper Replies: 246 Views: 270580	Interested in z set of boards. Haven't made up my mind wrt which option yet.
Topic: 2M Pot for Burst Generator
whomper Replies: 4 Views: 5383	Posted: Wed Aug 31, 2011 1:30 pm Subject: 2M Pot for Burst Generator Forum: DIY Hardware and Software » Ken Stone designs - CGS
whomper Replies: 4 Views: 5383	Thanks for the hints guys, they are really helpful. I'll give it a shot this weekend.
Topic: 2M Pot for Burst Generator
whomper Replies: 4 Views: 5383	Posted: Wed Aug 31, 2011 12:15 pm Subject: 2M Pot for Burst Generator Forum: DIY Hardware and Software » Ken Stone designs - CGS
whomper Replies: 4 Views: 5383	Been having double finding 2M pot. Is there a modification I can make to make use of smaller values, like 1M, 500K and even 100K?
Topic: Resonant Lopass Gate PCB's (New Batch 4/29/12)
whomper Replies: 926 Views: 738662	Posted: Wed Aug 31, 2011 12:14 pm Subject: Resonant Lopass Gate PCB's (New Batch 4/29/12) Forum: DIY Hardware and Software
whomper Replies: 926 Views: 738662	If another run happens, 2 for me please.
Topic: VC-ADSR build issue
whomper Replies: 18 Views: 14622	Posted: Tue Aug 30, 2011 7:05 am Subject: VC-ADSR build issue Forum: DIY Hardware and Software » Ken Stone designs - CGS
whomper Replies: 18 Views: 14622	Switched the 074 with a 324 that I just bought today, and it works! The ADSR works as planned (just need to reverse some Pot wiring as they are reversed. Thanks guys for your help!
Topic: VC-ADSR build issue
whomper Replies: 18 Views: 14622	Posted: Mon Aug 29, 2011 2:52 pm Subject: VC-ADSR build issue Forum: DIY Hardware and Software » Ken Stone designs - CGS
whomper Replies: 18 Views: 14622	Gary, Thanks for the quick tips. 1. All pots are between 0v-15v. 2. Power rail has 6.2V, probably due to working with +-15V. 3. Traced trigger signal all the way to 4016. PINs 9&3 are stat ...
Topic: VC-ADSR build issue
whomper Replies: 18 Views: 14622	Posted: Mon Aug 29, 2011 12:48 pm Subject: VC-ADSR build issue Forum: DIY Hardware and Software » Ken Stone designs - CGS
whomper Replies: 18 Views: 14622	Hi, I have just completed building a VC-ADSR and can not operationalize the module. I am getting a constant 14V at the output no matter if there in an input gate signal or not. Verified componen ...
Topic: TR808 kick pcb
whomper Replies: 144 Views: 193056	Posted: Sun Aug 21, 2011 1:16 pm Subject: TR808 kick pcb Forum: DIY Hardware and Software
whomper Replies: 144 Views: 193056	Are you guys interested in pcbs for the individual 808 voices? Sure! Bring them on!
Topic: Dim D
whomper Replies: 312 Views: 253341	Posted: Sun Jul 17, 2011 11:12 am Subject: Dim D Forum: DIY Hardware and Software » Jürgen Haible designs
whomper Replies: 312 Views: 253341	Yeah, I have built a double chorus versions with only the BBD boards. They sound amazing! I love them so much that I usually have them as the last step of an analog bass or lead sounds. Analog sequ ...
Topic: M185 sequencer Project - NEW PCB VERSION
whomper Replies: 1138 Views: 1119008	Posted: Fri Jun 03, 2011 9:23 am Subject: M185 sequencer Project - NEW PCB VERSION Forum: DIY Hardware and Software
whomper Replies: 1138 Views: 1119008	Hello hhmm, sounds a bit strange. Does the Reset button stop the playing ? It should only jump back to the first stage, not stop. -ryk Oh, you're right. Just checked it now and RESET do ...
Topic: M185 sequencer Project - NEW PCB VERSION
whomper Replies: 1138 Views: 1119008	Posted: Wed May 25, 2011 10:40 pm Subject: M185 sequencer Project - NEW PCB VERSION Forum: DIY Hardware and Software
whomper Replies: 1138 Views: 1119008	Hello Sorry for no reply guys, I have been away for some time and now back, so can try and help. Let me know if you are still having trouble with the START/STOP. -ryk Hi, Yes, I am sti ...