Search found 30 matches

does anyone can help me for pin assignment from the cpu.
my matrix key was broken. i plan to replace it with matrix key from other keyboard..

thx b4

how to used scope to find how the matrix key works?

does anyone can help with the datasheet?

thanks for reading this thread..
1. i have a keyboard Casio 5 octave that the machine was broken but the key was right. Chip that control the Key is MN4464-08LL. the matrix key has 17 pin out.

2. ...

i see...
really2 big project... Sad

i dont think i have time to build it..

does anyone have an idea to make pitch bend control for soundlab keyboard, like the other keyboard does?

btw can the singlebus keyboard play some note, i mean playing chord..??

i tried to rewire again..and everything work perfectly..

now i'll try to make singlebus keyboard controller..

Very Happy

cool man...

well done. how about the sound?

i have the other ...

3. clean flanger.
On trigger : set the gain=0, sens=0,vol=3
On SL : set the mixer off, ARgen off, osc1 n osc 2 off,

in the LFO : freq=10,o ...

dear friend...

as the explanation about soundlab, i know that we can get wah sound in the VCF. but in my SL, i can get it after i power on my SL as about 5 minutes later. power on SL, wait till 5 m ...

sorry sir, i dunno about this feature..
i'll try

check this attached file

here is the sound

http://www.geocities.com/yunus510/MyFirstSongUseSoundLab-Bread-If.mp3

how about this..

i've finished my soundlab and patch it out with guitar trigger.

this is the song..

http://electro-music.com/forum/download.php?id=5785

i've built my sound lab a few week ago. n now it has done well. i use it as a guitar effect. it's cool. but i didn't search for all sound that can be produced.
i've search for two character sound it ...

i've done it sir. as ur suggest to rewire/resolder the cable in front panel. now my soundlab has clean sound as well as u get..

thank u very much...

as info, i didn't change my power supply unit ...

ok..i see, now i try to recheck my work..i'll post the result as soon as possible.

for now i did't change my supply unit yet. how if i make it in right value for the supply?

Does the volume of the noise change if you turn the noise potentiometer?

no..the noise pot doesn't give any differences for the output sound.

and the other problem, the sound i record, i use the ...

in my case,

i build the original soundlab without give any patches in it. are the fine tunes for the oscillator could give it more better?

ok this time i post the sound sample of my soundlab.

the first sound record using soundlab, amplify with prince adder M 835, yamaha soundcard, adobe audition 2.0
http://www.free-hoster.cc/users/yu ...

ok this time i post the sound sample of my soundlab.

the first sound record using soundlab, amplify with prince adder M 835, yamaha soundcard, adobe audition 2.0
http://www.free-hoster.cc/users/yu ...

both of oscillator are work fine, LFO too. but i still hear the noise. the sound i heard is not clean as sound as the other have.

ok maybe in other time i will post the sound sample of my soundlab ...

does anyone can help me??

plz..

today i have finished build my soundlab. it's work but i heard noise that make the sound output didn't hear perfectly.

in case, i use dual power supply that the voltage i measured are +12 Volt, -14 ...

breadboard that i mean is the stripboard. i really need the PCB layout picture in 100% so i just print it out in the PCB n make it..

anyone can help me making the guitar trigger PCB layout.not just in breadboard..

anyone have idea about noise reduction??

Author	Message
Topic: bending Yamaha PSR-6
yunus510 Replies: 89 Views: 233575	Posted: Tue May 22, 2007 10:48 pm Subject: bending Yamaha PSR-6 Forum: DIY Hardware and Software » Circuit Bending
yunus510 Replies: 89 Views: 233575	does anyone can help me for pin assignment from the cpu. my matrix key was broken. i plan to replace it with matrix key from other keyboard.. thx b4
Topic: [Ask]How to combine this?
yunus510 Replies: 2 Views: 5542	Posted: Tue May 22, 2007 8:41 pm Subject: [Ask]How to combine this? Forum: DIY Hardware and Software » Circuit Bending
yunus510 Replies: 2 Views: 5542	how to used scope to find how the matrix key works? does anyone can help with the datasheet?
Topic: [Ask]How to combine this?
yunus510 Replies: 2 Views: 5542	Posted: Sun May 20, 2007 10:03 pm Subject: [Ask]How to combine this? Forum: DIY Hardware and Software » Circuit Bending
yunus510 Replies: 2 Views: 5542	thanks for reading this thread.. 1. i have a keyboard Casio 5 octave that the machine was broken but the key was right. Chip that control the Key is MN4464-08LL. the matrix key has 17 pin out. 2. ...
Topic: [Help!!]My soundlab has finished, but....
yunus510 Replies: 27 Views: 16225	Posted: Wed Mar 21, 2007 1:57 am Subject: [Help!!]My soundlab has finished, but.... Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 27 Views: 16225	i see... really2 big project... i dont think i have time to build it..
Topic: [Help!!]My soundlab has finished, but....
yunus510 Replies: 27 Views: 16225	Posted: Mon Mar 19, 2007 1:19 am Subject: [Help!!]My soundlab has finished, but.... Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 27 Views: 16225	does anyone have an idea to make pitch bend control for soundlab keyboard, like the other keyboard does? btw can the singlebus keyboard play some note, i mean playing chord..??
Topic: [Help!!]My soundlab has finished, but....
yunus510 Replies: 27 Views: 16225	Posted: Sat Mar 17, 2007 6:59 am Subject: [Help!!]My soundlab has finished, but.... Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 27 Views: 16225	i tried to rewire again..and everything work perfectly.. now i'll try to make singlebus keyboard controller..
Topic: Finished my soundlab
yunus510 Replies: 6 Views: 3501	Posted: Wed Sep 13, 2006 6:19 am Subject: Finished my soundlab Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 6 Views: 3501	cool man... well done. how about the sound?
Topic: [share]suggested position for best sound in guitar trigger
yunus510 Replies: 1 Views: 2373	Posted: Tue Sep 12, 2006 10:22 pm Subject: [share]suggested position for best sound in guitar trigger Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 1 Views: 2373	i have the other ... 3. clean flanger. On trigger : set the gain=0, sens=0,vol=3 On SL : set the mixer off, ARgen off, osc1 n osc 2 off, in the LFO : freq=10,o ...
Topic: [Help!!]My soundlab has finished, but....
yunus510 Replies: 27 Views: 16225	Posted: Tue Sep 12, 2006 10:13 pm Subject: [Help!!]My soundlab has finished, but.... Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 27 Views: 16225	dear friend... as the explanation about soundlab, i know that we can get wah sound in the VCF. but in my SL, i can get it after i power on my SL as about 5 minutes later. power on SL, wait till 5 m ...
Topic: [Help!!]My soundlab has finished, but....
yunus510 Replies: 27 Views: 16225	Posted: Tue Sep 12, 2006 9:54 pm Subject: [Help!!]My soundlab has finished, but.... Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 27 Views: 16225	sorry sir, i dunno about this feature.. i'll try check this attached file
Topic: [Help!!]My soundlab has finished, but....
yunus510 Replies: 27 Views: 16225	Posted: Tue Sep 12, 2006 6:37 am Subject: [Help!!]My soundlab has finished, but.... Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 27 Views: 16225	here is the sound http://www.geocities.com/yunus510/MyFirstSongUseSoundLab-Bread-If.mp3
Topic: Songs with Soundlab
yunus510 Replies: 113 Views: 282614	Posted: Tue Sep 12, 2006 6:36 am Subject: Songs with Soundlab Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 113 Views: 282614	how about this.. i've finished my soundlab and patch it out with guitar trigger. this is the song.. http://electro-music.com/forum/download.php?id=5785
Topic: [share]suggested position for best sound in guitar trigger
yunus510 Replies: 1 Views: 2373	Posted: Thu Sep 07, 2006 10:09 pm Subject: [share]suggested position for best sound in guitar trigger Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 1 Views: 2373	i've built my sound lab a few week ago. n now it has done well. i use it as a guitar effect. it's cool. but i didn't search for all sound that can be produced. i've search for two character sound it ...
Topic: [Help!!]My soundlab has finished, but....
yunus510 Replies: 27 Views: 16225	Posted: Thu Sep 07, 2006 9:45 pm Subject: [Help!!]My soundlab has finished, but.... Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 27 Views: 16225	i've done it sir. as ur suggest to rewire/resolder the cable in front panel. now my soundlab has clean sound as well as u get.. thank u very much... as info, i didn't change my power supply unit ...
Topic: [Help!!]My soundlab has finished, but....
yunus510 Replies: 27 Views: 16225	Posted: Sun Aug 06, 2006 1:34 am Subject: [Help!!]My soundlab has finished, but.... Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 27 Views: 16225	ok..i see, now i try to recheck my work..i'll post the result as soon as possible. for now i did't change my supply unit yet. how if i make it in right value for the supply?
Topic: [Help!!]My soundlab has finished, but....
yunus510 Replies: 27 Views: 16225	Posted: Sun Aug 06, 2006 12:52 am Subject: [Help!!]My soundlab has finished, but.... Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 27 Views: 16225	Does the volume of the noise change if you turn the noise potentiometer? no..the noise pot doesn't give any differences for the output sound. and the other problem, the sound i record, i use the ...
Topic: [Help!!]My soundlab has finished, but....
yunus510 Replies: 27 Views: 16225	Posted: Sat Aug 05, 2006 10:23 pm Subject: [Help!!]My soundlab has finished, but.... Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 27 Views: 16225	in my case, i build the original soundlab without give any patches in it. are the fine tunes for the oscillator could give it more better?
Topic: [Help!!]My soundlab has finished, but....
yunus510 Replies: 27 Views: 16225	Posted: Sat Aug 05, 2006 10:18 pm Subject: [Help!!]My soundlab has finished, but.... Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 27 Views: 16225	ok this time i post the sound sample of my soundlab. the first sound record using soundlab, amplify with prince adder M 835, yamaha soundcard, adobe audition 2.0 http://www.free-hoster.cc/users/yu ...
Topic: soundsample
yunus510 Replies: 1 Views: 2145	Posted: Sat Aug 05, 2006 10:17 pm Subject: soundsample Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 1 Views: 2145	ok this time i post the sound sample of my soundlab. the first sound record using soundlab, amplify with prince adder M 835, yamaha soundcard, adobe audition 2.0 http://www.free-hoster.cc/users/yu ...
Topic: [Help!!]My soundlab has finished, but....
yunus510 Replies: 27 Views: 16225	Posted: Sat Aug 05, 2006 5:58 pm Subject: [Help!!]My soundlab has finished, but.... Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 27 Views: 16225	both of oscillator are work fine, LFO too. but i still hear the noise. the sound i heard is not clean as sound as the other have. ok maybe in other time i will post the sound sample of my soundlab ...
Topic: [Help!!]My soundlab has finished, but....
yunus510 Replies: 27 Views: 16225	Posted: Fri Aug 04, 2006 8:25 am Subject: [Help!!]My soundlab has finished, but.... Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 27 Views: 16225	does anyone can help me?? plz..
Topic: [Help!!]My soundlab has finished, but....
yunus510 Replies: 27 Views: 16225	Posted: Thu Aug 03, 2006 7:19 pm Subject: [Help!!]My soundlab has finished, but.... Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 27 Views: 16225	today i have finished build my soundlab. it's work but i heard noise that make the sound output didn't hear perfectly. in case, i use dual power supply that the voltage i measured are +12 Volt, -14 ...
Topic: need PCB layout of guitar trigger...
yunus510 Replies: 2 Views: 3630	Posted: Thu Feb 02, 2006 12:38 am Subject: need PCB layout of guitar trigger... Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 2 Views: 3630	breadboard that i mean is the stripboard. i really need the PCB layout picture in 100% so i just print it out in the PCB n make it..
Topic: need PCB layout of guitar trigger...
yunus510 Replies: 2 Views: 3630	Posted: Thu Jan 26, 2006 2:04 am Subject: need PCB layout of guitar trigger... Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 2 Views: 3630	anyone can help me making the guitar trigger PCB layout.not just in breadboard..
Topic: anyone have idea about noise reduction??
yunus510 Replies: 2 Views: 4028	Posted: Fri Jan 06, 2006 1:24 pm Subject: anyone have idea about noise reduction?? Forum: DIY Hardware and Software » MusicFromOuterSpace.com designs by Ray Wilson
yunus510 Replies: 2 Views: 4028	anyone have idea about noise reduction??