electro-music.com   Dedicated to experimental electro-acoustic
and electronic music
 
    Front Page  |  Radio
 |  Media  |  Forum  |  Wiki  |  Links
Forum with support of Syndicator RSS
 FAQFAQ   CalendarCalendar   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   LinksLinks
 RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in  Chat RoomChat Room 
 Forum index » DIY Hardware and Software » Microcontrollers and Programmable Logic
AS3394 6-voice Synthesizer for DIY
Post new topic   Reply to topic Moderators: State Machine
Page 1 of 1 [15 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
Author Message
PropB3



Joined: May 14, 2012
Posts: 7
Location: Germany

PostPosted: Mon Mar 22, 2021 9:36 am    Post subject: AS3394 6-voice Synthesizer for DIY Reply with quote  Mark this post and the followings unread

Hello,

I want to share my latest Projekt. 6-voice Polyphonic synth using the AS3394 and an PIC as Controller Chip. You may have a look at:
https://hbo-synthesizer-workbench.jimdofree.com/
to get more Infos.

Let have fun.


Img_1365.jpg
 Description:
 Filesize:  177.41 KB
 Viewed:  314 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

Img_1365.jpg



AS3394_Firmware.zip
 Description:

Download
 Filename:  AS3394_Firmware.zip
 Filesize:  167.47 KB
 Downloaded:  396 Time(s)


AS3394_Synth.pdf
 Description:

Download
 Filename:  AS3394_Synth.pdf
 Filesize:  948.1 KB
 Downloaded:  587 Time(s)

Back to top
View user's profile Send private message
Grumble



Joined: Nov 23, 2015
Posts: 1294
Location: Netherlands
Audio files: 30

PostPosted: Mon Mar 22, 2021 11:54 am    Post subject: Reply with quote  Mark this post and the followings unread

Congrats on this great project!
_________________
my synth
Back to top
View user's profile Send private message Visit poster's website
LFLab



Joined: Dec 17, 2009
Posts: 497
Location: Rosmalen, Netherlands

PostPosted: Wed Mar 24, 2021 3:13 am    Post subject: Reply with quote  Mark this post and the followings unread

That is a VERY tidy layout of that board, nice!
Sounds great also, are you going to integrate this into a case or is the journey the goal? Smile
Back to top
View user's profile Send private message
State Machine
Janitor
Janitor


Joined: Apr 17, 2006
Posts: 2809
Location: New York
Audio files: 24

PostPosted: Tue Jun 29, 2021 12:37 pm    Post subject: Reply with quote  Mark this post and the followings unread

Impressive layout. Love this DIY project ! Well done.

Bill
Back to top
View user's profile Send private message Send e-mail
THeff



Joined: Sep 01, 2006
Posts: 229
Location: Florida
Audio files: 33

PostPosted: Wed Feb 16, 2022 10:32 am    Post subject:
Subject description: Built AS3394, works great!
Reply with quote  Mark this post and the followings unread

Hi Hubert,

As you see I built your AS3394 6 Voice synth and it works great! Thanks for posting this great project. If you are seeing this post I have been trying to contact you via the email on your HBO Synth website with no response. I'm interested in obtaining the firmware for the Vitellius 1 Teensy synth.

Regards,
THeff, Florida, USA


AS3394 Synth Front.jpg
 Description:
 Filesize:  7.88 MB
 Viewed:  191 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

AS3394 Synth Front.jpg



20220211_104943.jpg
 Description:
 Filesize:  8.27 MB
 Viewed:  182 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

20220211_104943.jpg



20220211_105143.jpg
 Description:
 Filesize:  8.41 MB
 Viewed:  199 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

20220211_105143.jpg


Back to top
View user's profile Send private message
blakeAlbion



Joined: Jun 16, 2020
Posts: 23
Location: Boston, Massachusetts, USA

PostPosted: Tue Oct 11, 2022 3:14 am    Post subject: Reply with quote  Mark this post and the followings unread

Regarding this post, how would I create a set of PCBs using the links provided here? I have never fanned a pcb before.
Thanks,
Ben
Back to top
View user's profile Send private message
craigbarnes



Joined: Oct 30, 2022
Posts: 22
Location: UK

PostPosted: Sun Oct 29, 2023 8:23 am    Post subject: Reply with quote  Mark this post and the followings unread

Is the developer still around, I too am in search of the source code for the Vitelliuis 1 synthesizer to port to a Teensy 4.1 from 3.2, I have used the contact form a couple of times but I think Hubert is not around any more.
Back to top
View user's profile Send private message
mosc
Site Admin


Joined: Jan 31, 2003
Posts: 18197
Location: Durham, NC
Audio files: 212
G2 patch files: 60

PostPosted: Sun Oct 29, 2023 3:15 pm    Post subject: Reply with quote  Mark this post and the followings unread

craigbarnes:

Try sending him a PM, or use the contact form on his website.

_________________
--Howard
my music and other stuff
Back to top
View user's profile Send private message Send e-mail Visit poster's website AIM Address
craigbarnes



Joined: Oct 30, 2022
Posts: 22
Location: UK

PostPosted: Mon Oct 30, 2023 1:02 pm    Post subject: Reply with quote  Mark this post and the followings unread

mosc wrote:
craigbarnes:

Try sending him a PM, or use the contact form on his website.


I sent an email to poly61@rocketmail and that bounced immediately, I used the contact form twice, I'm guessing that goes to the same place, but no bounce or notification.

I will try a PM.

Thanks
Back to top
View user's profile Send private message
mosc
Site Admin


Joined: Jan 31, 2003
Posts: 18197
Location: Durham, NC
Audio files: 212
G2 patch files: 60

PostPosted: Mon Oct 30, 2023 3:39 pm    Post subject: Reply with quote  Mark this post and the followings unread

Well if you have an extra $30,000 or so just pick up one of these Shocked


maximus+keys+angle.png
 Description:
 Filesize:  1.06 MB
 Viewed:  29 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

maximus+keys+angle.png



_________________
--Howard
my music and other stuff
Back to top
View user's profile Send private message Send e-mail Visit poster's website AIM Address
craigbarnes



Joined: Oct 30, 2022
Posts: 22
Location: UK

PostPosted: Tue Oct 31, 2023 11:48 am    Post subject: Reply with quote  Mark this post and the followings unread

So I got a reply from PropB3 and unfortunately he is not willing to share his code. Even though a Teensy 3.2 is no longer available the guy is too selfish or arrogant to share so others in the DIY community can carry on his good work.


I have over 40 projects on my github page and I share everything, I don't understand some people.
Back to top
View user's profile Send private message
mosc
Site Admin


Joined: Jan 31, 2003
Posts: 18197
Location: Durham, NC
Audio files: 212
G2 patch files: 60

PostPosted: Tue Oct 31, 2023 1:37 pm    Post subject: Reply with quote  Mark this post and the followings unread

OK, sorry you couldn't get the code you want, but please refrain from calling people names on this forum. This not Facebook or X. Thanks...
_________________
--Howard
my music and other stuff
Back to top
View user's profile Send private message Send e-mail Visit poster's website AIM Address
craigbarnes



Joined: Oct 30, 2022
Posts: 22
Location: UK

PostPosted: Tue Oct 31, 2023 1:44 pm    Post subject: Reply with quote  Mark this post and the followings unread

I will speak how I feel and his attitude stinks.

I'm.sat here and can be hot by a Russian missile or drone at any moment but I still find the time in-between the constant air raids to publish my work and help people who message me, perhaps I should stick to Facebook
Back to top
View user's profile Send private message
mosc
Site Admin


Joined: Jan 31, 2003
Posts: 18197
Location: Durham, NC
Audio files: 212
G2 patch files: 60

PostPosted: Wed Nov 01, 2023 11:14 am    Post subject: Reply with quote  Mark this post and the followings unread

You are welcome here...
_________________
--Howard
my music and other stuff
Back to top
View user's profile Send private message Send e-mail Visit poster's website AIM Address
blakeAlbion



Joined: Jun 16, 2020
Posts: 23
Location: Boston, Massachusetts, USA

PostPosted: Thu Jan 25, 2024 7:36 am    Post subject: PCBs? Reply with quote  Mark this post and the followings unread

Please help.

How can I obtain PCBs for this project?
Is the only option to laser print the PDFs and then do an etch?
I do not live in a location where I can do etching.

Aside for trying to reverse engineer the layers into gerbers, is there any way to use these images to have boards fabricated for me?

Thanks,

Ben
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic Moderators: State Machine
Page 1 of 1 [15 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
 Forum index » DIY Hardware and Software » Microcontrollers and Programmable Logic
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Forum with support of Syndicator RSS
Powered by phpBB © 2001, 2005 phpBB Group
Copyright © 2003 through 2009 by electro-music.com - Conditions Of Use