g2 pitch stick and controllers question

sidx · Joined: Jun 05, 2005 Posts: 20 Location: Russia,Moscow

dunno what is this - the range between right board of stick and right edge of stick-hole is bigger then a range of left side.
its like in a picture http://www.avallonltd.com/pics/clavia/nordmodularg2.jpg
but here maybe is an isometric projection in photo.Buti have this space REAL.Is it normal?

and anotther thing i was scared - if i try to shake a bit my g2 controllers - i can hear a sound somtheing like crackle...like a minor sand under controller - is this normal too? maybe i break something? =( But my g2 kept very carefull.And controllers not usings very often.Plz help if u know something about this.THanx
p.s. sorry for bad english

mosc · Posted: Sat Nov 26, 2005 7:45 pm Post subject:

I took a careful look and listen to my G2X and I think everything you are seeing is normal.

The pitch stick is not perfectly centered, but very close to it.

The very soft sandlike sound is from the micro detents in the encoder controls. Nothing, in my opinion, to worry about.

sidx · Joined: Jun 05, 2005 Posts: 20 Location: Russia,Moscow

about pitch-stick -
if i push it to left and touch the edge of hole - tone change function finishing perfect in this time too.If do this to right side - tone change function will finish but there will also a little space before edge of hole.
Understood about sandle noise - thanx a lot for make me quiet.