Performance mode - tweaking of parameters with sequencer

firemongers · Joined: Jan 20, 2008 Posts: 4 Location: Ireland

Hi everyone.
I've decided to make a more advanced use of my Nord Lead 2X and decided to use it with my MPC1000.
That way I can sequence various loops simultaneously, using the 4 outputs and 4 different midi channels.
That means I need to set the right programs for each slot before each song.

This is why I was thinking of using the performance mode, which basically allows you to select 4 programs at the same time.
The only thing is: whenever I select a performance, nothing is tweakable, which sucks big time. Maybe I'm missing something. The manual doesn't mention this possible limitation.
Is it possible to tweak each slot's parameter in Performance mode?
Thanks

blue hell

firemongers · Joined: Jan 20, 2008 Posts: 4 Location: Ireland

Thanks for your reply
Global channel is set to 0 and slot channels are set to 3,4,7 and 6 so it's not that.

Wout Blommers · Posted: Sun Jan 20, 2008 7:35 pm Post subject:

firemongers · Joined: Jan 20, 2008 Posts: 4 Location: Ireland

I can't believe that worked.
I should have thought of changing the global channel.
Just the fact that it was a different channel than the 4 slots wasn't enough.
Now this is perfect for live tweaking and performance
Thanks a million

Wout Blommers · Posted: Mon Jan 21, 2008 8:09 am Post subject:

firemongers · Joined: Jan 20, 2008 Posts: 4 Location: Ireland

pints

Wout Blommers · Posted: Mon Jan 21, 2008 2:30 pm Post subject:

Yeah!