My first patch

DanielW · Joined: Sep 23, 2009 Posts: 31 Location: Stockholm, Sweden

OK, after a couple of weeks with the Wizoo guide, tutorials and this forum, this is the first patch I've made that I consider useful.

Useful to make noise, that is. The sound created will be further f***ed up with all effects required in Pro Tools.

Try the higher octaves!

LFOstyrOSC01.pch

Description:

A simple patch using an LFO as master to three oscillators creating dark noise.

Download (listen)

Filename:

LFOstyrOSC01.pch

Filesize:

1.71 KB

Downloaded:

331 Time(s)

Wout Blommers · Posted: Fri Oct 09, 2009 1:54 pm Post subject:

Well, my Modular isn't hooked to the computer, but I 'cleaned up' the Patch a bit... Actually a little more than a bit Smile

It's always handy to follow the red lines...

Wout

LFOstyrOsc01.pch

Description:

Reshuffled it...

Download (listen)

Filename:

LFOstyrOsc01.pch

Filesize:

1.71 KB

Downloaded:

329 Time(s)

DanielW · Joined: Sep 23, 2009 Posts: 31 Location: Stockholm, Sweden

Thanks a lot for the input, Wout!

One thing though, why de-assign detune of oscs B and A from the knobs? I guess the freed-up knobs could be used for clip and pan, but was there any special reason you did that?

Wout Blommers · Posted: Sat Oct 10, 2009 11:51 am Post subject:

What I did was changing the the two Osc modules in 'cheaper' ones. I didn't check the Knobs though...
Using lesser DSP load makes it easier to build further without loosing Voices. So I wonder why there is a 3% nothing in the Global window... (that Filter...)
If you don't use it and there is a module without it, it's always better.

Visual it is much easier to study what is going on in the Patch. Main rule: follow the Audio set up.

Wout